11-2
Notes for Machine Operators
11.3 Contacting the Service Department
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Tests and repairs may only be carried out by the Rexroth service
department or by especially trained staff.
For tests at the installation the corresponding safety regulations have to
be complied with.
Repair of drive components at the machine can be very time-consuming.
For this reason, replace defective drive components completely.
Danger to persons and damage to machines
can arise from the removal of failures!
⇒ Only have failures removed by especially trained
staff.
WARNING
⇒ Do not put protective devices out of operation.
⇒ Observe the Safety Instructions for Electric Drives
and Controls in the homonymous chapter.
If you would like to contact our service department, we ask you to have
the following information ready in order to facilitate quick and purposeful
handling:
type data and serial numbers of devices and motors,
failure condition,
diagnostic display, if available, and
software versions, if necessary.
For addresses and telephone numbers please see the printed
documentation
(chapter
(http://www.boschrexroth.com).
"Service
&
Support")
DOK-INDRV*-GEN-**VRS**-WA01-EN-P
Rexroth IndraDrive
or
the
Internet