Canon imageRUNNER ADVANCE DX C5870i Service Manual page 904
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > CLEAR
CNT-MCON
1
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
Supplement/Memo
CNT-DCON
1
MMI
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Supplement/Memo
MN-CON
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
Supplement/Memo
CARD
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Clear of Main Controller service counter
To clear the service counter counted by the Main Controller PCB.
When clearing the service counter counted by the Main Controller PCB
Select the item, and then press OK key.
COPIER> COUNTER
See COUNTER for the target counter.
For R&D
Clear Settings/Registration setting VL
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the Settings/Registration setting values.
- Preferences (excluding values for Paper Type Management Settings)
- Adjustment/Maintenance
- Function Settings
- Set Destination (excluding Address Lists)
- Management Settings (excluding Department ID Management)
When clearing various setting values of [Settings/Registration]
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
- The setting value is cleared after the main power switch is turned OFF/ON.
- If this item is executed while a login application other than User Authentication is running, it
switched to User Authentication after reboot. Set the login application using SMS as needed.
SMS (Service Management Service): An application for management which can be used on
remote UI.
Deletion of setting values
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To delete the setting values of address lists, forwarding settings, Settings/Registration and service
mode.
For details, refer to "Backup Data List" in the Service Manual.
When initializing the setting values
1) Select the item, and then press OK key.
The machine is automatically rebooted.
2) Turn OFF/ON the main power switch.
- Output the service mode setting values by P-PRINT before execution. After execution, enter
necessary setting value.
- RAM data is cleared after the main power switch is turned OFF/ON.
- If this item is executed while a login application other than User Authentication is running, it
switched to User Authentication after reboot. Set the login application using SMS as needed.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> MISC-P> P-PRINT
SMS (Service Management Service): An application for management which can be used on
remote UI.
Clear of card ID-related data
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the data related to the card ID (department).
When clearing the data related to the card ID
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
The value is cleared after the main power switch is turned OFF/ON.
892
9. Service Mode
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
