Canon imageRUNNER ADVANCE DX C5870i Service Manual page 784
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
COPIER (Service mode for printer) > DISPLAY (State display mode) > ACC-STS
DECK
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
CARD
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
RAM
Detail
Use Case
Adj/Set/Operate Method
Unit
COINROBO
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
NETWARE
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
HDD
Detail
Use Case
Adj/Set/Operate Method
IA-RAM
Detail
Use Case
Adj/Set/Operate Method
Unit
1
Dspl of Paper Deck connection state
To display the connecting state of the Paper Deck.
When checking the connection between the machine and the Paper Decks
N/A (Display only)
0 to 5
0: Not connected, 1: Connected, 2 to 4: Not used, 5: Multi-purpose Tray only
1
Dspl of connection state of Card Reader
To display the connecting state of Card Reader.
When checking the connection between the machine and the Card Reader
N/A (Display only)
0 to 1
0: No card is inserted while the Card Reader is connected. (Copy is not available.)
1: Card Reader is not connected, or card is inserted while the Card Reader is connected. (Copy
is available.)
1
Dspl of image processing memory capacity
To display the capacity of memory for image processing on the Main Controller PCB.
When checking the memory capacity of the machine
N/A (Display only)
MB
1
Dspl of Coin Manager connection state
To display the connecting state of the Coin Manager.
When checking the connection between the machine and the Coin Manager
N/A (Display only)
0 to 1
0: Not connected, 1: Connected
1
Install state dspl of NetWare firmware
To display the installation state of the NetWare firmware.
When checking whether NetWare firmware is installed to the machine
N/A (Display only)
0 to 1
0: Not installed, 1: Installed
1
Display of Strg model name
To display the model name of Storage.
When checking the model name of Storage used on the machine
N/A (Display only)
1
Display of MNCON PCB memory capacity
To display the memory capacity of the Main Controller PCB.
When checking the memory capacity of the Main Controller PCB
N/A (Display only)
MB
772
9. Service Mode
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
