Canon imageRUNNER ADVANCE DX C5870i Service Manual page 885
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > MISC
SEG-ADJ3
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
K-ADJ3
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
ACS-ADJ3
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
ACS-EN3
2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Set criteria for text/photo: back side
To set whether to judge the original scanned with the Scanner Unit (for back side) in Text/
Photo/Map mode as text or photo.
As the value is increased, the original tends to be detected as a photo document, and as the value
is decreased, the original tends to be detected as a text document.
The setting of this item is enabled only when the DADF (1-path model) is installed.
When adjusting the judgment level of text/photo original scanned with the Scanner Unit (for back
side) in Text/Photo/Map mode
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
When the Copyboard or DADF (reverse model) is installed, the setting of this item is disabled.
-4 to 4
0
Set criteria for black text: back side
To set whether to judge the color of the text scanned with the Scanner Unit (for back side) as black.
As the value is larger, the text tends to be detected as black.
The setting of this item is enabled only when the DADF (1-path model) is installed.
When adjusting the criteria for judging the color of the text scanned with the Scanner Unit (for back
side)
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
When the Copyboard or DADF (reverse model) is installed, the setting of this item is disabled.
-3 to 3
0
Set ACS B&W/color jdgmt stdrd:back side
To set whether to judge the original scanned with the Scanner Unit (for back side) in ACS mode
as B&W/color original.
As the value is increased, the original tends to be detected as a B&W document, and as the value
is decreased, the original tends to be detected as a color document.
The setting of this item is enabled only when the DADF (1-path model) is installed.
When adjusting the color recognition level in ACS mode at scanning with the Scanner Unit (for
back side)
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
When the Copyboard or DADF (reverse model) is installed, the setting of this item is disabled.
-3 to 3
0
ACS mode judgmt area:stream, back side
To set the ACS judgment area in the image on the back side stream read with the DADF (1-path
model).
As the value is larger, the judgment area is widened.
The setting of this item is enabled only when the DADF (1-path model) is installed.
When adjusting the ACS judgment area in the image on the back side at stream reading
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
When the Copyboard or DADF (reverse model) is installed, the setting of this item is disabled.
-2 to 2
1
873
9. Service Mode
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
