Canon imageRUNNER ADVANCE DX C5870i Service Manual page 840
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > DENS
SOFST-C1
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
SOFST-C2
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
Additional Functions
Mode
■ BLANK
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > BLANK
BLANK-T
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Supplement/Memo
Amount of Change per
Unit
Pch Sns (C) light-RX charcs: weak, Swave
To enter the characteristic value when light intensity (Senkrecht wave) of the Registration Patch
Sensor is weak.
When replacing the Registration Patch Sensor Unit, enter the value on the label included in the
package of the new unit, as well as write it down on the service label.
- When replacing the Registration Patch Sensor Unit
- When replacing the Main Controller PCB or clearing the RAM (in the case backup/restoration is
not possible)
Enter the setting value, and then press OK key.
When the Registration Patch Sensor is replaced, enter the set of values written on the label, then
execute auto gradation adjustment (Full Adjust / Quick Adjust).
0 to 150
50
COPIER > ADJUST > DENS > POFST-C1
COPIER > ADJUST > DENS > POFST-C2
COPIER > ADJUST > DENS > SOFST-C2
Adjustment/Maintenance> Adjust Image Quality> Auto Adjust Gradation> Full Adjust or Quick
Adjust
Pch Sns (C) light-RX charcs: strg, Swave
To enter the characteristic value when light intensity (Senkrecht wave) of the Registration Patch
Sensor is strong.
When replacing the Registration Patch Sensor Unit, enter the value on the label included in the
package of the new unit, as well as write it down on the service label.
- When replacing the Registration Patch Sensor Unit
- When replacing the Main Controller PCB or clearing the RAM (in the case backup/restoration is
not possible)
Enter the setting value, and then press OK key.
When the Registration Patch Sensor is replaced, enter the set of values written on the label, then
execute auto gradation adjustment (Full Adjust / Quick Adjust).
0 to 999
COPIER > ADJUST > DENS > POFST-C1
COPIER > ADJUST > DENS > POFST-C2
COPIER > ADJUST > DENS > SOFST-C1
Adjustment/Maintenance> Adjust Image Quality> Auto Adjust Gradation> Full Adjust or Quick
Adjust
Adjustment of leading edge margin
To adjust the margin on the leading edge of paper.
As the value is incremented by 1, the margin is increased toward the center of the paper by 1 pixel.
- Upon user's request (to reduce the margin)
- When increasing the margin for transfer separation/fixing separation
Enter the setting value, and then press OK key.
0 to 1000
pixel
94
The length of a pixel differs depending on the print resolution (600 dpi: 0.0423 mm, 1200 dpi:
0.0212 mm).
1
828
9. Service Mode
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
