Canon imageRUNNER ADVANCE DX C5870i Service Manual page 894
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > INSTALL
BLE-USE
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
PATCH-S
2
Detail
Use Case
Adj/Set/Operate Method
Caution
INSTDTST
1
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
FAX-USE
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SUB-IF
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ON/OFF of BLE module option
To set whether to enable the installed BLE module option.
Set 1 when using the BLE module option. The BLE setting screen is displayed in [Settings/
Registration].
When installing the BLE module option
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Do not set 1 when the BLE module option is not installed.
0 to 1
0: OFF, 1: ON
0
Adj Patch Sensor S-wave intensity tgt VL
To adjust the target value of the S-wave light intensity when replacing the Patch Sensor.
The light intensity of the Guide Plate under the condition of no soiling on the sensor window is
obtained.
When replacing the Patch Sensor
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Execute this item only for a new Patch Sensor.
Batch set installation date info: YMDHN
Information on the current date and time is entered collectively in YMDHN of INSTDT by pressing
INSTDTST.
At installation
Select the item, and then press OK key.
COPIER>OPTION>USER>INSTDT-Y
COPIER>OPTION>USER>INSTDT-M
COPIER>OPTION>USER>INSTDT-D
COPIER>OPTION>USER>INSTDT-H
COPIER>OPTION>USER>INSTDT-N
Enable/disable FAX function
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To switch enable/disable of the FAX function of a device mounted with a FAX Board.
When disabling the FAX function of a device mounted with a FAX Board
1) Enter the setting value, and then press OK key.
2) Turn ON/OFF the Main Power.
0 to 1
0: OFF, 1: ON
1
Set for line connecting to cloud service
To select the network line connecting to the Canon cloud service
When the Canon cloud service is used with a sub line
1) Select either [Wired LAN+Wireless LAN] or [Wired LAN+Wired LAN] when selecting interface
2) Configure the network setting for the sub line
3) Select 1 for this setting
4) Turn the main power OFF, and then ON
0 to 1
0: Main line, 1: Sub line
0
882
9. Service Mode
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
