Canon imageRUNNER ADVANCE DX C5870i Service Manual page 631
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
E732-0010-00
Detection Description
Remedy
E732-0020-00
Detection Description
Remedy
E732-0021-00
Detection Description
Remedy
E732-0022-00
Detection Description
Remedy
E732-0023-04
Detection Description
Remedy
Communication error
A communication error between the Reader Unit and the Main Controller PCB was detected.
[Related parts]
- Harness between the Main Controller PCB (UN41/J54) and the Reader Unit
- Main Controller PCB (UN41)
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference] Before replacing the Main Controller PCB, back up the service mode data and restore
the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES
Communication error
A communication error between the Reader Unit and the Main Controller PCB was detected.
[Related parts]
- Harness between the Main Controller PCB (UN41/J54) and the Reader Unit
- Main Controller PCB(UN41)
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference] Before replacing the Main Controller PCB, back up the service mode data and restore
the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES
Communication error
A communication error between the Reader Unit and the Main Controller PCB was detected.
[Related parts]
- Harness between the Main Controller PCB (UN41/J54) and the Reader Unit
- Main Controller PCB(UN41)
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference] Before replacing the Main Controller PCB, back up the service mode data and restore
the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES
Communication error
A communication error between the Reader Unit and the Main Controller PCB was detected.
[Related parts]
- Harness between the Main Controller PCB (UN41/J54) and the Reader Unit
- Main Controller PCB(UN41)
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference] Before replacing the Reader Unit, back up the service mode data (approx. 2 min) and
restore the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES
Communication error
A communication error between the Scanner Unit and the Main Controller PCB was detected at
startup/recovery from sleep.
[Related parts]
- Harness between the Scanner Unit and the Main Controller PCB
- Scanner Unit
- Main Controller PCB(UN41)
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference] Before replacing the Main Controller PCB, back up the service mode data and restore
the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES
619
8. Error/Jam/Alarm
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
