Canon imageRUNNER ADVANCE DX C5870i Service Manual page 530
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
E197-2007-05
Detection Description
Remedy
E197-6001-05
Detection Description
Remedy
E197-6002-05
Detection Description
Remedy
E197-6003-05
Detection Description
Remedy
E197-6004-05
Detection Description
Remedy
Serial communication error
Communication error with 25K-DECK is detected (on the Master side)
[Related parts]
- Harness between the Main Controller PCB (UN41) and 2.5k_DECK
- 2.5k_DECK PCB
- Main Controller PCB (UN41)
[Remedy]
- Check / replace the related harnesses / cables / connectors / parts.
Serial communication error
Communication error with T1 High Voltage CPU is detected
[Related parts]
- Harness between the Drum Driver PCB (UN54/J214) and Transfer High Voltage PCB (UN7/J521)
- Harness between the Main Controller PCB (UN41/J73) and Drum Driver PCB (UN54/J212)
- Transfer High Voltage PCB (UN7)
- Drum Driver PCB (UN54)
- Main Controller PCB (UN41)
- Laser Scanner Unit
- Environment Sensor (UN19)
[Remedy] Perform the following in the while checking whether the error is cleared.
1. Check the connection of J214 on the Drum Driver PCB(UN54).
2. Check / replace the related harnesses / cables / connectors / parts.
Serial communication error
Communication error with T2 High Voltage CPU is detected
[Related parts]
- Harness between the Drum Driver PCB (UN54/J214) and Transfer High Voltage PCB (UN7/J521)
- Harness between the Main Controller PCB (UN41/J73) and Drum Driver PCB (UN54/J212)
- Transfer High Voltage PCB (UN7)
- Drum Driver PCB (UN54)
- Main Controller PCB (UN41)
- Laser Scanner Unit
- Environment Sensor (UN19)
[Remedy]
- Check / replace the related harnesses / cables / connectors / parts.
Serial communication error
Communication error with the Charging Developing CLK CPU is detected
[Related parts]
- Harness between the Drum Driver PCB (UN54/J228) and Charging High Voltage PCB (UN57/
J511)
- Harness between the Main Controller PCB (UN41/J73) and Drum Driver PCB (UN54/J212)
- Charging High Voltage PCB (UN57)
- Drum Driver PCB (UN54)
- Main Controller PCB (UN41)
[Remedy] Perform the following in the while checking whether the error is cleared.
1. Check the connection of J228 on the Drum Driver PCB(UN54).
2. Check / replace the related harnesses / cables / connectors / parts.
Serial communication error
Communication error with the Charging CPU is detected
[Related parts]
- Harness between the Drum Driver PCB (UN54/J228) and Charging High Voltage PCB (UN57/
J511)
- Harness between the Main Controller PCB (UN41/J73) and Drum Driver PCB (UN54/J212)
- Charging High Voltage PCB (UN57)
- Drum Driver PCB (UN54)
- Main Controller PCB (UN41)
[Remedy]
- Check / replace the related harnesses / cables / connectors / parts.
518
8. Error/Jam/Alarm
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
