Canon imageRUNNER ADVANCE DX C5870i Service Manual page 641
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
E747-061A-00
Detection Description
Remedy
E747-061B-00
Detection Description
Remedy
E747-0718-00
Detection Description
Remedy
E747-0719-00
Detection Description
Remedy
E747-071A-00
Detection Description
Remedy
E747-071B-00
Detection Description
Remedy
Board error
There was unexpected interruption from ASIC.
[Related parts]
- Flat cable betweens the Reader Unit and the Main Controller PCB
- Open I/F PCB (when non-Canon-made controller is installed)
- Main Controller PCB(UN41)
- SSD Unit
[Remedy] Check/replace the related harness/cable, connector and parts.
Board error
There was unexpected interruption from ASIC.
[Related parts]
- Flat cable betweens the Reader Unit and the Main Controller PCB
- Open I/F PCB (when non-Canon-made controller is installed)
- Main Controller PCB(UN41)
- SSD Unit
[Remedy] Check/replace the related harness/cable, connector and parts.
Board error
There was unexpected interruption from ASIC.
[Related parts]
- Flat cable betweens the Reader Unit and the Main Controller PCB
- Open I/F PCB (when non-Canon-made controller is installed)
- Main Controller PCB(UN41)
- SSD Unit
[Remedy] Check/replace the related harness/cable, connector and parts.
Board error
There was unexpected interruption from ASIC.
[Related parts]
- Flat cable betweens the Reader Unit and the Main Controller PCB
- Open I/F PCB (when non-Canon-made controller is installed)
- Main Controller PCB(UN41)
- SSD Unit
[Remedy] Check/replace the related harness/cable, connector and parts.
Board error
There was unexpected interruption from ASIC.
[Related parts]
- Flat cable betweens the Reader Unit and the Main Controller PCB
- Open I/F PCB (when non-Canon-made controller is installed)
- Main Controller PCB(UN41)
- SSD Unit
[Remedy] Check/replace the related harness/cable, connector and parts.
Board error
There was unexpected interruption from ASIC.
[Related parts]
- Flat cable betweens the Reader Unit and the Main Controller PCB
- Open I/F PCB (when non-Canon-made controller is installed)
- Main Controller PCB(UN41)
- SSD Unit
[Remedy] Check/replace the related harness/cable, connector and parts.
629
8. Error/Jam/Alarm
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
