Canon imageRUNNER ADVANCE DX C5870i Service Manual page 846
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
■ PASCAL
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > PASCAL
OFST-P-Y
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
OFST-P-M
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
OFST-P-C
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
OFST-P-K
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Y density adj at test print reading
To adjust the offset of Y-color test print reading signal at auto gradation adjustment (full
adjustment).
When replacing the Reader Controller PCB/clearing RAM data, enter the value of service label.
As the value is larger, the image after adjustment gets darker.
When replacing the Reader Controller PCB/clearing RAM data
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
After the setting value is changed, write the changed value in the service label.
-128 to 128
According to the adjustment value of the Reader at factory shipment
M density adj at test print reading
To adjust the offset of M-color test print reading signal at auto gradation adjustment (full
adjustment).
When replacing the Reader Controller PCB/clearing RAM data, enter the value of service label.
As the value is larger, the image after adjustment gets darker.
When replacing the Reader Controller PCB/clearing RAM data
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
After the setting value is changed, write the changed value in the service label.
-128 to 128
According to the adjustment value of the Reader at factory shipment
C density adj at test print reading
To adjust the offset of C-color test print reading signal at auto gradation adjustment (full
adjustment).
When replacing the Reader Controller PCB/clearing RAM data, enter the value of service label.
As the value is larger, the image after adjustment gets darker.
When replacing the Reader Controller PCB/clearing RAM data
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
After the setting value is changed, write the changed value in the service label.
-128 to 128
According to the adjustment value of the Reader at factory shipment
Bk density adj at test print reading
To adjust the offset of Bk-color test print reading signal at auto gradation adjustment (full
adjustment).
When replacing the Reader Controller PCB/clearing RAM data, enter the value of service label.
As the value is larger, the image after adjustment gets darker.
When replacing the Reader Controller PCB/clearing RAM data
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
After the setting value is changed, write the changed value in the service label.
-128 to 128
According to the adjustment value of the Reader at factory shipment
834
9. Service Mode
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
