Canon imageRUNNER ADVANCE DX C5870i Service Manual page 567
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
E593-8002-02
Detection Description
Remedy
E5F0-8001-02
Detection Description
Remedy
E5F0-8002-02
Detection Description
Remedy
Error in the Punch Shift Motor (Puncher Unit-A)
The Punch Slide HP Sensor does not detect the punch unit when shifting the punch unit by 37mm
toward front.
[Related parts]
PUNCHER UNIT-A
- Harnesses from the Punch Slide HP Sensor (PS302) to the Puncher Controller PCB
- Harnesses from the Punch Shift Motor (M302) to the Puncher Controller PCB
- Punch Slide HP Sensor (PS302)
- Punch Shift Motor (M302)
- Puncher Controller PCB (PCB301)
- Finisher Controller PCB (PCB101)
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference] When replacing the Puncher Controller PCB, refer to "Adjustment> When Replacing
the Parts" in the Service Manual.
[Reference] When replacing the Finisher Controller PCB, refer to "Adjustment> When Replacing
the Parts" in the Service Manual.
Error in the Saddle Paper End Stopper Motor (Finisher-AB/A)
The saddle paper end stopper does not come off the Saddle Paper End Stopper HP Sensor when
the Saddle Paper End Stopper Motor has been driven for 1 second.
[Related parts]
STAPLE FIN-AB/BOOKLET FIN-AB, FOLD FIN-A
- Harnesses from the Saddle Paper End Stopper HP Sensor (PS210) to the Saddle Stitcher
Controller PCB
- Harnesses from the Saddle Paper End Stopper Motor (M206) to the Saddle Stitcher Controller
PCB
- Saddle Paper End Stopper HP Sensor (PS210)
- Saddle Paper End Stopper Motor (M206)
- Saddle Stitcher Controller PCB (PCB201)
- Finisher Controller PCB (PCB101)
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference] When replacing the Finisher Controller PCB, refer to "Adjustment> When Replacing
the Parts" in the Service Manual.
Error in the Saddle Paper End Stopper Motor (Finisher-AB/A)
The Saddle Paper End Stopper HP Sensor does not detect the saddle paper end stopper when
the Saddle Paper End Stopper Motor has been driven for 4 seconds.
[Related parts]
STAPLE FIN-AB/BOOKLET FIN-AB, FOLD FIN-A
- Harnesses from the Saddle Paper End Stopper HP Sensor (PS210) to the Saddle Stitcher
Controller PCB
- Harnesses from the Saddle Paper End Stopper Motor (M206) to the Saddle Stitcher Controller
PCB
- Saddle Paper End Stopper HP Sensor (PS210)
- Saddle Paper End Stopper Motor (M206)
- Saddle Stitcher Controller PCB (PCB201)
- Finisher Controller PCB (PCB101)
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference] When replacing the Finisher Controller PCB, refer to "Adjustment> When Replacing
the Parts" in the Service Manual.
555
8. Error/Jam/Alarm
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
