Canon imageRUNNER ADVANCE DX C5870i Service Manual page 925
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > FNC-SW
INVALPDL
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
IMGCNTPR
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
CDS-FIRM
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
Supplement/Memo
CDS-MEAP
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
Disable of PDL license
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To disable the registered PDL license.
When "1: Disabled" is set, PDL is disabled even if a PDL license is registered. This is set to the
machines installed at convenience stores, which do not allow PDL to be used.
When prohibiting the use of PDL
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Registered PDL license is enabled, 1: Disabled
0
Setting of image quality mode
To set the image quality mode.
When 0 is set, "image quality priority" mode is applied. When 1 is set, "counter priority" mode is
applied. When 2 is set, "image quality priority (photo)" mode is applied.
Upon user's request
Enter the setting value, and then press OK key.
0 to 2
0: Image quality priority mode, 1: Counter priority mode, 2: Image priority (photo) mode
1
Set to allow firmware update by admin
* Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow the user (administrator) to perform firmware update linked with CDS and
collection of log files.
When 1 is set, [Distribution Update] is added to remote UI, and [Firmware Update] is added to
[Register/Update Software] of local UI. Log files can be collected from remote UI.
When allowing the administrator to update the firmware
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Do not use it for purposes other than collecting log files.
Be sure to return the value to 0 after use.
0 to 1
0: Disabled, 1: Enabled
It differs according to the location.
COPIER> OPTION> FNC-SW> LCDSFLG
Management Settings> License/Other> Register/Update Software
CDS: Contents Delivery System
Set to allow MEAP installation by admin
* Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow the user (administrator) to install MEAP applications from CDS and enable
iR options.
When 1 is set, Updater can be activated from [Settings/Registration].
When allowing the administrator to install MEAP applications and enable iR options from CDS
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
1
CDS: Contents Delivery System
913
9. Service Mode
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
