Canon imageRUNNER ADVANCE DX C5870i Service Manual page 930
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > FNC-SW
BXSHIFT
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
SELF-CHK
2
HOME-SW
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
NO-LGOUT
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JM-ERR-D
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Setting of binding at 0mm binding margin
To set whether to judge the job as a job "without binding" when storing a PDL job in Inbox while
the binding margin is set to "0".
By setting the binding margin to 0 mm while "0" is set, the job is processed as "without binding".
"Booklet" in "Options" on the Inbox screen can be also used.
When "1" is set, it is judged as "with binding" even the binding margin is 0 mm so "Booklet", which
has an exclusive relationship with "binding", cannot be used.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When storing a PDL job in Mail Box while 1 is set, "Booklet" in "Options" on the Mail Box screen
cannot be used.
0 to 1
0: Without binding, 1: With binding
0
For R&D
Set screen displayed with Main Menu key
To set whether to display the main menu screen or the screen registered as the startup screen
when pressing Main Menu key.
Upon user's request (to change the startup screen)
Enter the setting value, and then press OK key.
0 to 1
0: Main Menu screen, 1: Screen registered as the startup screen
0
Display/hide of logout button
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to display or hide [Logout] button.
When 0 is set, [Logout] button is displayed on the screen, and logout with the ID key is enabled.
(Normal)
When 1 is set, [Logout] button is not displayed, and logout with the ID key is disabled.
Upon user's request (for customization, etc.)
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Display, 1: Hide
0
Set of error display of 0CAx jam (DCON)
To set whether to display "0CAx" jam as the error "E996-0CAx".
In the case of a jam, log cannot be obtained depending on the timing.
By selecting 1 when the jam "0CAx" occurs, it is displayed as the error "E996-0CAx" so that the
log can be obtained.
When obtaining a log at the occurrence of 0CAx jam
Enter the setting value, and then press OK key.
0 to 1
0: Display as a jam, 1: Display as an error
0
COPIER> OPTION> FNC-SW> JM-ERR-R
918
9. Service Mode
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
