Summary of Contents for Dell EMC VxFlex Ready Node
Page 1
Dell EMC VxFlex Ready Node Version 3.x AMS User Guide P/N 302-005-733 REV 02 June 2019...
Page 2
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. USE, COPYING, AND DISTRIBUTION OF ANY DELL SOFTWARE DESCRIBED IN THIS PUBLICATION REQUIRES AN APPLICABLE SOFTWARE LICENSE. Dell Technologies, Dell, EMC, Dell EMC and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property of their respective owners. Published in the USA.
VLAN support................42 Networking and connectivity - 13G servers........43 Networking and connectivity - 14G servers........50 Virtual IP Address..................59 Monitor of SDC and SDS connections............60 S.M.A.R.T. hardware monitoring..............60 Snapshots....................61 Dell EMC VxFlex Ready Node AMS User Guide...
Page 4
Property sheets..................105 Part 2 VxFlex OS Performance Fine-Tuning Chapter 5 VxFlex OS performance fine-tuning Tune VxFlex OS for best performance............112 Performance tuning post-installation............112 Upgrades..................112 Fine granularity layout performance considerations...... 112 Dell EMC VxFlex Ready Node AMS User Guide...
Page 5
Modifying an MDM IP address using drv_cfg....... 150 Permanent Device Loss state............151 Managing ESX servers................152 Modifying parameters on ESXi servers.........152 Checking the SDC state on ESX servers........154 Restarting the AMS service on Linux............155 Dell EMC VxFlex Ready Node AMS User Guide...
Page 7
Compression Mode for Fine Granularity Storage Pools......246 Set Default Compression Mode..............246 Snapshot Policies..................246 Migrate volume trees (V-Trees)............... 247 Set V-Tree migration priority..............249 Pause V-Tree migration................249 Roll back V-Tree migration............... 250 Part 4 Reference Dell EMC VxFlex Ready Node AMS User Guide...
Page 8
Open the KVM console - VxFlex Ready Node R640/R740xd servers .....................331 Map the ISO file on a VxFlex Ready Node server......333 Map the ISO file on a VxFlex Ready Node 14G server....333 Dell EMC VxFlex Ready Node AMS User Guide...
Page 9
DTK A08: BIOS set commands fail..........344 Rebranding operation fails............345 Check the logs for error messages..........345 Additional resources................. 346 VxFlex OS resources..............346 Dell Lifecycle Controller (LC)............346 Dell OpenManage Deployment Toolkit (DTK)......346 Glossary Dell EMC VxFlex Ready Node AMS User Guide...
Page 11
Faulty server in BackendStorage view............... 191 Set Volume Use Read RAM Cache window...............204 System Event Log with failed DIMM................. 210 FG Storage Pool with DAX device................214 Add Volume window....................217 User Preferences window..................235 Network ports......................258 Dell EMC VxFlex Ready Node AMS User Guide...
Default ports......................255 VxFlex OS Alerts in SNMP, VxFlex OS GUI, REST, and ESRS........295 VxFlex Ready Node–specific Alerts in SNMP, VxFlex OS GUI, REST, and ESRS..312 Hardware ISO configuration settings................ 342 Dell EMC VxFlex Ready Node AMS User Guide...
Preface As part of an effort to improve its product lines, Dell EMC periodically releases revisions of its software and hardware. Therefore, some functions described in this document might not be supported by all versions of the software or hardware currently in use.
Page 16
EMC products, go to Dell EMC Online Support at https://support.emc.com. Technical support Go to Dell EMC Online Support and click Service Center. You will see several options for contacting Dell EMC Technical Support. Note that to open a service request, you must have a valid support agreement. Contact your Dell EMC sales representative for details about obtaining a valid support agreement or with questions about your account.
This section describes an overview of the benefits and system requirements of VxFlex Chapters include: Chapter 1, "Introduction to VxFlex Ready Node" Chapter 2, "Architecture" Chapter 3, "Opening the VxFlex OS GUI and Logging In" Chapter 4, "VxFlex OS GUI Features" Dell EMC VxFlex Ready Node AMS User Guide...
CHAPTER 1 Introduction to VxFlex Ready Node This section introduces VxFlex Ready Node. What is VxFlex OS?................... 20 System requirements..................21 Dell EMC VxFlex Ready Node AMS User Guide...
The AMS solution enables the following: VxFlex OS GUI client CLI client (SCLI and AMS CLI) REST The AMS enables reporting via ESRS (EMC proprietary) and SNMP. Dell EMC VxFlex Ready Node AMS User Guide...
One 10/25/100 GbE switch is required. Multiple switches may be used for high availability and load balancing purposes. Separate (one or more) 1 GbE switches may be used for the VxFlex OS management network. Dell EMC VxFlex Ready Node AMS User Guide...
If the node does not have a 1 GbE port, minimally a BMC (iDRAC) port is needed. IP addresses Refer to "IP Addresses" under Networking in the Architecture section, which explains the required network configurations for VxFlex Ready Node. vCenter support vCenter 6.0, 6.5 and 6.7U1 are supported. Dell EMC VxFlex Ready Node AMS User Guide...
Page 24
Introduction to VxFlex Ready Node Dell EMC VxFlex Ready Node AMS User Guide...
Depending on the desired configuration (described later), the software components are installed on the server and give rise to a virtual SAN layer exposed to the applications that reside on the servers. Dell EMC VxFlex Ready Node AMS User Guide...
SDSs in the system. This repository is constantly replicated to the Slave MDMs, so they can take over with no delay. Every MDM cluster has one Master MDM. Dell EMC VxFlex Ready Node AMS User Guide...
All members of the MDM cluster have the same MDM package installed on them. Before a server makes its way into the MDM cluster, it must follow the following path: 1. Install the MDM package on the server. Dell EMC VxFlex Ready Node AMS User Guide...
SDSs. This allows the system to maintain data availability following a single-point failure. The data will still be available following multiple failures, as long as each failure took place in a different Storage Pool. Dell EMC VxFlex Ready Node AMS User Guide...
Each Storage Pool can work in one of the following modes: Zero-padding enabled Ensures that every read from an area previously not written to returns zeros. Some applications might depend on this behavior. Furthermore, zero padding Dell EMC VxFlex Ready Node AMS User Guide...
By grouping them into a Fault Set, you are configuring VxFlex OS to mirror the data for all devices in this Fault Set. The mirroring should take place on SDSs that are outside of this Fault Set. Dell EMC VxFlex Ready Node AMS User Guide...
For FG, you must have NVDIMM configured as a DAX device. After NVDIMM is all set up in your environment, you need to configure an NVDIMM Acceleration Pool (for more information on Acceleration Pool, see "Acceleration Pools") and then you can Dell EMC VxFlex Ready Node AMS User Guide...
VxFlex OS maintains the user data in a RAID-1 mesh mirrored layout. Each piece of data is stored on two different servers. The copies are randomly distributed over the storage devices. Rebuild and rebalance processes are fully automated, but are configurable. Dell EMC VxFlex Ready Node AMS User Guide...
The rebuild I/Os are limited both in bandwidth and in the amount of concurrent I/Os. As long as the number of concurrent rebuild I/Os, and the bandwidth they consume, do not exceed the predefined limits, rebuild I/Os will be served. Once Dell EMC VxFlex Ready Node AMS User Guide...
Rebalance, unlike rebuild, does not impact the system’s reliability and therefore reducing its impact is not risky. Note: Rebalance throttling affects the system's performance and should only be used by advanced users. The following possible priority policies may be applied: Dell EMC VxFlex Ready Node AMS User Guide...
SDS device, and is validated by the SDC before the data returns to the application. If the validating end detects a discrepancy, it will initiate a retry. The checksum will be done in the granularity of a sector (1/2KB). Dell EMC VxFlex Ready Node AMS User Guide...
Block Delete in ESXi 5.x and later hosts The following output is an example of typical output: esxcli storage core device vaai status get -d eui.7dbf14034834bbe01bf7e55800000002 eui.7dbf14034834bbe01bf7e55800000002 VAAI Plugin Name: ATS Status: supported Dell EMC VxFlex Ready Node AMS User Guide...
RFcache uses the full capacity of SSD devices (RFcache) performed by one or (up to eight) to provide a larger footprint of more dedicated SSD or read-only LRU (Least Recently Used) based- Dell EMC VxFlex Ready Node AMS User Guide...
Page 39
Cache feature. Note: If a fault occurs in the caching device before the writes have been offloaded, all the HDD devices cached by DAS Cache acquire failed status, and a rebuild process Dell EMC VxFlex Ready Node AMS User Guide...
These options can be configured during deployment, using the deployment wizard. Note: AMS running on a VM hosted on ESXi servers must use the vmxnet3 vmnic. Use of the e1000 vmnic is not supported, and causes network failures. Dell EMC VxFlex Ready Node AMS User Guide...
Multiple IP subnets Multiple IP subnets used for the VxFlex OS data network cannot be on the same subnet in a VMware setup. For more information, see the VMware limitation in the following link: Dell EMC VxFlex Ready Node AMS User Guide...
1 and data network 2). Each data and management network can reside on a different VLAN, enabling network separation at a much higher granularity than previously possible. The network administrator may configure a different VLAN ID for each of the following networks: Dell EMC VxFlex Ready Node AMS User Guide...
1 GbE and iDRAC ports. The AMS/Discovery server must be on the same Layer 2 network as the management ports. This allows the use of the broadcast protocol for initial IP address configuration. Dell EMC VxFlex Ready Node AMS User Guide...
AMS must have a routable IP Path to the iDRAC IP address on the node. Figure 4 Single-node R730xd (2U1N) server (storage only) typical connection diagram Figure 5 Single-node R730xd (2U1N) server (converged) typical connection diagram Dell EMC VxFlex Ready Node AMS User Guide...
In storage-only configurations, the customer ports can be used as additional data ports. Note: When the AMS configures the data network ports in Linux, the interface names used are sio_d_1 and sio_d_2. Dell EMC VxFlex Ready Node AMS User Guide...
VxFlex VxFlex OS VxFlex OS VxFlex VxFlex OS Not in Monitoring Client Client Management Data1 Network Network Data2 Network Port1 Port2 Interface name enoXX enoXX enpXsXfX enpXsXfX enoXX enoXX (RHEL 7) Dell EMC VxFlex Ready Node AMS User Guide...
Page 48
In this case, the 10GB PCI NIC is presented on slot 6, and the logical bus address of its ports is 5:0 and 5:1. (See Figure 7 on page 50, in which the Dell EMC VxFlex Ready Node AMS User Guide...
Page 49
This command displays the Ethernet network names (enXXX) of the interfaces and the correlating logical bus address (without the loopback). For example: eno3 bus-info: 0000:09:00.0 eno4 bus-info: 0000:09:00.1 enp6s0f0 bus-info: 0000:05:00.0 enp6s0f1 bus-info: 0000:05:00.1 eno1 bus-info: 0000:01:00.0 eno2 bus-info: 0000:01:00.1 Dell EMC VxFlex Ready Node AMS User Guide...
Mode Access, and assign it to one VLAN. A management switch that has only one use is recommended. Usually, this implies one IP subnet, but the switch can contain several subnets on a single VLAN. Dell EMC VxFlex Ready Node AMS User Guide...
Data cables are connected to two switches for high availability, via the nodes' 10 GbE, 25 GbE, or 100 GbE ports. Management interfaces are connected to a switch on a separate management network using onboard and BMC (iDRAC) ports. Dell EMC VxFlex Ready Node AMS User Guide...
Page 52
VxFlex OS best practice ports. If the VLAN ID is defined, it must also be configured on the switch side connected to the relevant selected port. R740xd servers Note: In the following tables use SFP+ for 10 GbE, and SFP28 for 25 GbE ports. Dell EMC VxFlex Ready Node AMS User Guide...
In configurations with only two GPUs, another PCIe-based NIC is supported in either slot 3 or slot 4. R640 servers Note: In the following tables use SFP+ for 10 GbE, and SFP28 for 25 GbE ports. Dell EMC VxFlex Ready Node AMS User Guide...
Physical Mgmt Switch Switch 1 Switch 1 Switch 2 Switch 2 Mgmt Switch Switch Note: This configuration supports more than one PCIe-based NIC in slots 2 and 3. Dell EMC VxFlex Ready Node AMS User Guide...
(RHEL 7) Slot name Free PCI Free PCIe slot, Free PCIe slot, Free PCIe Integrated NIC Integrated slot, left right port right port slot, left NIC 4 port port Dell EMC VxFlex Ready Node AMS User Guide...
Page 57
5:0 and 5:1. (See the "Correlating physical slot and Ethernet network names" figure, in which the correlation between PCIe slot and the logical bus address is highlighted in yellow.) Designation: PCIe Slot 1 Current Usage: Available Designation: PCIe Slot 2 Dell EMC VxFlex Ready Node AMS User Guide...
Page 58
This command displays the Ethernet network names (enXXX) of the interfaces and the correlating logical bus address (without the loopback). For example: bus-info: 0000:19:00.0 p1p1 bus-info: 0000:3b:00.0 bus-info: 0000:19:00.1 bus-info: 0000:19:00.2 bus-info: 0000:19:00.3 p1p2 bus-info: 0000:3b:00.1 Dell EMC VxFlex Ready Node AMS User Guide...
MDMs should be mapped to the existing virtual IP addresses. If virtual IP addresses need to be modified, you must use the CLI or the REST API, and it must be done with extreme caution. Dell EMC VxFlex Ready Node AMS User Guide...
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) protocols. In Linux-based environments, S.M.A.R.T.-compatible HDDs, SSDs and RAID storage controllers can be monitored for S.M.A.R.T. attributes such as temperature, SSD wear Dell EMC VxFlex Ready Node AMS User Guide...
Each hardware vendor defines specific thresholds for the S.M.A.R.T. attributes. This feature currently supports storage devices controlled by LSI, HP and Dell RAID controllers, and stand-alone devices. During system deployment, an external monitoring tool is installed as part of the LIA on each node. Additional RAID controller tools must be installed manually after system deployment: storcli for LSI RAID controllers, hpssacli for HP RAID controllers, or perccli for DELL RAID controllers.
In the V-Tree diagram, S and S are snapshots of V is a snapshot of snapshot S . Together, V and S are the V-Tree of V Dell EMC VxFlex Ready Node AMS User Guide...
Note that the MDM does not actually reserve the estimated capacity at the destination (since the source volume's capacity can grow Dell EMC VxFlex Ready Node AMS User Guide...
Page 64
Storage Pool. V-Tree migration can also be paused internally by the system. System pauses happen when a rebuild operation begins at either the source or destination Storage Pool. If the Dell EMC VxFlex Ready Node AMS User Guide...
They become regular snapshots, as if the user created them manually. If you remove them, those that are not locked are removed, while the auto snapshots which are locked are detached. Dell EMC VxFlex Ready Node AMS User Guide...
OS (including ESXi VM-support) logs. Logs are collected in ZIP format, which you can download for viewing. You can collect logs using the VxFlex OS Gateway, and the REST API. The log collection VxFlex OSprocess has the following stages: Dell EMC VxFlex Ready Node AMS User Guide...
The MDM and SDS nodes can be assigned up to eight IP addresses, enabling wider bandwidth and better I/O performance and redundancy. You perform the physical layer setup with the Deployment wizard. Dell EMC VxFlex Ready Node AMS User Guide...
Per Protection Domain, divide the physical storage units into Storage Pools, and optionally, into Fault Sets. 3. Install the SDC component on all nodes on which the application will access the data exposed by the VxFlex OS volumes. Dell EMC VxFlex Ready Node AMS User Guide...
RAID protection scheme. By having all SDS members of the Storage Pool participate, VxFlex OS ensures: Highest and most stable and consistent performance possible Rapid recovery and redistribution of data Massive IOPS and throughput You can define volumes as follows: Dell EMC VxFlex Ready Node AMS User Guide...
VxFlex OS implementation in an ESXi-based system In the VMware environment, the MDM and SDS components are installed on a dedicated SVM, whereas the SDC is installed directly on the ESXi host. Implementation Dell EMC VxFlex Ready Node AMS User Guide...
SVM that points to the physical disk on the ESXi node. Pre-deployment considerations You should take these considerations into account before deploying the system: Are there flash devices that will be added to the SDS? Dell EMC VxFlex Ready Node AMS User Guide...
When the LUNs are used as raw devices, the file system layer is omitted. If multiple nodes are accessing the same device a cluster file system solution must be implemented on the client side. Dell EMC VxFlex Ready Node AMS User Guide...
Instant maintenance mode enables you to restart a server that hosts an SDS, with minimal impact on VxFlex OS, thus bypassing the disruption and effort caused by disorderly shutdown, Protection Domain shutdown, and orderly shutdown. Dell EMC VxFlex Ready Node AMS User Guide...
You can provision, maintain, and monitor VxFlex OS using the following management clients: Command Line Interface (CLI) The CLI enables you to perform the entire set of configure, maintain, and monitor activities in VxFlex OS. Dell EMC VxFlex Ready Node AMS User Guide...
Protection Domain Maximum number of volumes + snapshots in single VTree Maximum capacity per Protection Domain 8 PD Maximum capacity per SDS 128 TB Maximum Nodes per system (includes SDSs 1024 and SDCs) Dell EMC VxFlex Ready Node AMS User Guide...
Page 79
AMS does not support CloudLink CloudLink encryption is not supported by the VxFlex Ready Node AMS If more are needed, contact Customer Support. On VMware servers, the maximum devices per SDS is 59. Dell EMC VxFlex Ready Node AMS User Guide...
Opening the VxFlex OS GUI and Logging In The following topics describe how to open the VxFlex OS GUI, and log in procedures. Log in to the VxFlex OS GUI................82 Connection and disconnection information............82 Dell EMC VxFlex Ready Node AMS User Guide...
MDM cluster, and the management IP addresses If the VxFlex OS GUI loses its connection with the MDM, the window display is dimmed, and a notification dialog box is displayed. Dell EMC VxFlex Ready Node AMS User Guide...
Monitor various aspects of your system Backend and Frontend views—see "Monitoring the System using the VxFlex OS GUI" Hardware view—see "Viewing detailed hardware properties" Find information about your system’s license System Settings menu—see "Viewing licensing information" Dell EMC VxFlex Ready Node AMS User Guide...
Mode, and part of those SDSs’ capacity is temporarily protected on other SDSs YELLOW Snapshot capacity (yellow outline) ✓ Capacity-related statuses ✓ ORANGE Data is not protected ✓ ✓ (degraded) Rebuild or Rebalance in progress ✓ Dell EMC VxFlex Ready Node AMS User Guide...
The Hardware view shows the status of the physical hardware components in your node. This view provides read-only information, and lets you perform some configuration activities, such as adding and removing physical storage devices, adding and removing devices used for caching purposes, and more. Dell EMC VxFlex Ready Node AMS User Guide...
Hardware components—Each Property Sheets—Provide detailed read- button displays relevant information only information about the object selected in the Property Sheet in the panel on in the middle panels of the window Dell EMC VxFlex Ready Node AMS User Guide...
Protection Domain Storage Pool Click the Navigation toggle at the top left of the screen to display the navigation tree. You can change the Dashboard display by selecting the desired navigation tree Dell EMC VxFlex Ready Node AMS User Guide...
When the dashboard is minimized to a widget, the Full-Screen button is displayed in the top-right-corner, as shown in the following figure. This button toggles the display back to full dashboard mode. Dell EMC VxFlex Ready Node AMS User Guide...
These indicators show that one or more alerts are active, but not the number of alerts. Note: The filter used in the Backend view does not influence the Dashboard display. Dell EMC VxFlex Ready Node AMS User Guide...
VxFlex OS GUI Features Figure 18 Dashboard tiles The following table describes the tiles displayed on the Dashboard. Dell EMC VxFlex Ready Node AMS User Guide...
3 - Internal I/O The tile displays the system's internal I/O. Clicking on the arrow icon cycles through total internal I/O, internal I/O due to migration, and internal I/O due to rebalance operations. Dell EMC VxFlex Ready Node AMS User Guide...
Different icons are used to represent various MDM states. A tooltip displays the IP addresses used by the MDM cluster or node. The following figure shows how management nodes are displayed on the Dashboard. Dell EMC VxFlex Ready Node AMS User Guide...
Slave Master The following tables show how management clusters are displayed on the Dashboard. Table 28 Management node icons with normal operational status (green) Icon Description 5-node cluster 3-node cluster single node Dell EMC VxFlex Ready Node AMS User Guide...
SDCs and snapshots, and lets you perform various configuration operations. You can access the following views from the Frontend menu: Volumes and SDCs. The main areas of the Frontend views are: Dell EMC VxFlex Ready Node AMS User Guide...
Volumes view—displays volume Command menu—contains a list of details, including size, mapped SDCs, commands which you can perform on the row selected in the table. Dell EMC VxFlex Ready Node AMS User Guide...
1. In any of the Frontend views, navigate to the objects that you want to add to the filter, and select them. 2. Right-click and select Filter by. Depending on the object, there may be further options, such as: Filter by Consistency Group > Dell EMC VxFlex Ready Node AMS User Guide...
Note: Some objects in the system can be identified by ID numbers. The ID numbers displayed in the GUI can be used in CLI commands to specify these objects. Dell EMC VxFlex Ready Node AMS User Guide...
Your filtering choice would depend on your current problem or management needs. You can also add a specific object to the filter, using the Filter By command from the Command menu or context-sensitive menu. Dell EMC VxFlex Ready Node AMS User Guide...
If you find that there are active alerts, you can switch to State Summary table view, or the Monitor > Alerts view to see more details about the alerts. Dell EMC VxFlex Ready Node AMS User Guide...
Page 101
If there are pending security certificates, and if an SDS is in Maintenance Mode, this is also indicated here. Alerts marked blue are for information purposes only, and do not require that any action be taken. Dell EMC VxFlex Ready Node AMS User Guide...
Page 102
Rebalance jobs, as well as pending jobs to be processed. Related Property Sheet section: Rebuild/ Credited incoming and outgoing information is Rebalance displayed for each process (Backward Rebuild, Forward Rebuild and Rebalance). Dell EMC VxFlex Ready Node AMS User Guide...
You can filter the table rows according to alert severity, and according to object types in the system. For a list of alerts generated by the system, see "System events". Dell EMC VxFlex Ready Node AMS User Guide...
(from left item, if one has been defined to right: High, Medium, Low) #—the line number in the Alerts table Alert—the alert message generated by the system. Dell EMC VxFlex Ready Node AMS User Guide...
Note: If the background device scanner is enabled, several device read statistics are dramatically affected. Consistency Group for the related volumes, including a list of the volumes, and the Consistency Group name. Dell EMC VxFlex Ready Node AMS User Guide...
Page 106
Information is displayed for each built-in NIC’s PCI slot and ports. CPU (Central Processing Unit) displays details about the node’s CPUs, including inventory and specifications, temperature, voltage and cache information for L1, L2 and L3 Dell EMC VxFlex Ready Node AMS User Guide...
Note: You can open property sheets, duplicate them, and then simultaneously work on other unrelated objects in the system. Figure 24 Multiple floating Property Sheets Dell EMC VxFlex Ready Node AMS User Guide...
Page 108
VxFlex OS GUI Features Display\Hide property sheet button Duplicated property sheets toggle Duplicate property sheet to a new Multiple property sheets opened using the window button Duplicate property sheet to a new window button Dell EMC VxFlex Ready Node AMS User Guide...
PART 2 VxFlex OS Performance Fine-Tuning This section provides an overview of the different tasks required to enhance VxFlex OS performance. Chapter 5, "VxFlex OS performance fine-tuning" Dell EMC VxFlex Ready Node AMS User Guide...
VxFlex OS Performance Fine-Tuning Dell EMC VxFlex Ready Node AMS User Guide...
Page 111
VxFlex OS system changes................113 Optimize Linux....................121 Optimize ESXi....................123 Optimize the SVM.................... 123 Optimizing VM guests..................124 VxFlex OS Performance Parameters..............126 RAID controller virtual disk settings..............127 Apply Performance Profiles to system components..........128 Dell EMC VxFlex Ready Node AMS User Guide...
(CPU and memory) that are consumed. A high_performance profile (or configuration) will always consume more resources. This document will describe commands using the VxFlex OS command line interface (scli) to quickly and easily modify the desired performance profile. Dell EMC VxFlex Ready Node AMS User Guide...
To change the profile back to compact Execute the command: scli -- set_performance _parameters --all_sds -- all_sdc -- apply_to_mdm -- profile compact To view full parameter settings for an MDM Execute the command: scli -- query_performan ce_parameters --print_all Dell EMC VxFlex Ready Node AMS User Guide...
(least recently used) based-caching resources dedicated for the SDS. This type of caching reacts SSD devices quickly to workload changes to speed up HDD or flash PCI Read performance. Dell EMC VxFlex Ready Node AMS User Guide...
If users wish to enable/disable Read RAM Cache, perform either of the following steps. Read RAM Cache may be enabled/disabled on the Protection Domain, or for each SDS in the cluster. Task Command To enable Read RAM cache Run one of the following commands: Dell EMC VxFlex Ready Node AMS User Guide...
To create an RFcache device and configure it, use the following steps: 1. Create an RFcache device (Recommendation: create 1 device per SDS). scli --add_sds_rfcache_device --sds_name <NAME> -- rfcache_device_path <device_path> --rfcache_device_name <RFcache device NAME> Dell EMC VxFlex Ready Node AMS User Guide...
Perform the following steps, for all the NIC cards in the VxFlex OS system: Procedure 1. Run the ifconfig command to get the NIC information. 2. Depending on the OS, run the command: Dell EMC VxFlex Ready Node AMS User Guide...
2. Determine the appropriate NIC name by typing the command: netsh interface ipv4 show interface Output similar to the following appears: Dell EMC VxFlex Ready Node AMS User Guide...
The network connection may disconnect briefly during this phase. 6. Verify that the configuration is working, by typing the command: ping –f –l 8972 <Destination_IP_Address> Output similar to the following should be displayed: Dell EMC VxFlex Ready Node AMS User Guide...
Configure Jumbo Frames for NIC cards in the Storage Virtual Machine (SVM)-based VxFlex OS servers. About this task Perform the following steps, for all the NIC cards in the VxFlex OS system: Dell EMC VxFlex Ready Node AMS User Guide...
> /sys/block/sdb/queue/scheduler When CPUs have more than twelve physical cores and more performance is required from the node. For example: when CloudLink is being used for SW encryption or when Dell EMC VxFlex Ready Node AMS User Guide...
6. Ping the node to ensure that the GRUB change was implemented. The ping time should be in the 0.03 ms range. 7. Repeat the procedure on every 14G node with a Skylake CPU. Dell EMC VxFlex Ready Node AMS User Guide...
Cores per socket should be set to maximum so all vCPU will be allocated to a single virtual socket. 2. From the Resources tab of the Virtual Machine Properties window, select Reserve all guest memory (All locked). The Virtual Machine Properties window is displayed: Dell EMC VxFlex Ready Node AMS User Guide...
When using SSD devices, it is recommended that you modify the devices' I/O scheduler. Type the following on each server, for each SDS device: echo noop > /sys/block/<device_name>/queue/scheduler Example: echo noop > /sys/block/sdb/queue/scheduler Dell EMC VxFlex Ready Node AMS User Guide...
PVSCSI controllers can help realize the maximum potential of guest performance. It is strongly recommended that you review this VMware Knowledge Base article (article 2053145) so that you can make educated decisions regarding PVSCSI values. Dell EMC VxFlex Ready Node AMS User Guide...
3. Set the VD Caching attributes as NRWTD (No Read Ahead, Write Through, Direct). Note: For VxFlex Ready Node based install, refer to the VxFlex Ready Node documentation. The virtual disk configuration guidelines are different for external caching solutions such as DAS Cache. Dell EMC VxFlex Ready Node AMS User Guide...
2. Right-click the object and select Set Performance Profile for XXX, where XXX represents one of the following: MDMs All SDSs All SDCs The Set Performance Profile for window is displayed. 3. Select a profile from the drop-down list, and click OK. Dell EMC VxFlex Ready Node AMS User Guide...
VxFlex OS activity and components. Chapters include: Chapter 6, "Managing System Objects" Chapter 7, "Security Management" Chapter 8, "Monitoring the System using the VxFlex OS GUI" Chapter 9, "Configuring the System using the VxFlex OS GUI" Dell EMC VxFlex Ready Node AMS User Guide...
Page 130
Managing and Monitoring Dell EMC VxFlex Ready Node AMS User Guide...
The following topics describe how to manage and configure VxFlex Ready Node system objects. basics......................132 Syntax......................133 Managing the VxFlex OS system..............135 Cluster operations.................... 135 Managing the SDSs and cache................141 operations....................144 Managing ESX servers..................152 Restarting the AMS service on Linux..............155 Dell EMC VxFlex Ready Node AMS User Guide...
To avoid using the --mdm_ip parameter in every command, or avoid having to install the CLI on other servers, use SSH or RDM to log in to the shell running on the management server. Dell EMC VxFlex Ready Node AMS User Guide...
Each command entry uses the above syntax and looks like the following example: Usage: scli --cmd_example --r1 (--r2 | --r3 <V1>) [o1 <V2>|o2] [Options] Description: a description of what cmd_example does Parameter Description --r1 r1 description Dell EMC VxFlex Ready Node AMS User Guide...
Command help Syntax scli --help [Options] Description/Notes Use this command to view CLI help. Parameters Parameter Description Options: CHOOSE ONE Help on MDM commands Help on SDS commands Help on volume-related commands Dell EMC VxFlex Ready Node AMS User Guide...
3-node cluster mode on page 138 Replacing a Master MDM, as described in Replacing a Master MDM on page 138 Transfer the MDM cluster component using the AMS on page 139 Dell EMC VxFlex Ready Node AMS User Guide...
A server can be gracefully removed from the MDM cluster if the server is in standby state. About this task Once a server is in standby state, it can be gracefully removed from the system without impacting on normal system operation. Dell EMC VxFlex Ready Node AMS User Guide...
Standby servers can be added to a 3-node cluster at any time, using the VxFlex OS GUI. Procedure 1. In the Hardware view, click the Cluster menu, and select Extend to 5 Node Cluster Mode. Dell EMC VxFlex Ready Node AMS User Guide...
Master MDM, switch cluster control from the Master MDM to one of the Slave MDMs in the cluster. This operation ensures a graceful transfer of control, before removal of the server. Procedure 1. In the Hardware view, click the Cluster menu, and select Replace Master MDM. Dell EMC VxFlex Ready Node AMS User Guide...
1. If there is no standby node in the system, add a standby node: a. Use the VxFlex OS GUI Hardware view to find a server with a non-MDM role. This server will be the target. For example: Dell EMC VxFlex Ready Node AMS User Guide...
Click Close. The Node Properties sheet displays the source server as a standby MDM and the target server as an MDM in the cluster. Dell EMC VxFlex Ready Node AMS User Guide...
VxFlex OS does not prevent unnecessary degraded status or disconnection of SDS. Therefore, in such situations, it is recommended to place the SDS in Maintenance Mode before commencing this procedure. Dell EMC VxFlex Ready Node AMS User Guide...
Page 142
6. On the SDS, perform one of the following: Operating System Task Linux Run the command: Pkill sds Windows From command line, run the command: net stop sds_service & net start sds_service Dell EMC VxFlex Ready Node AMS User Guide...
For one or more Storage Pools—caching must be configured at this level for caching to work in the corresponding SDSs. Write handling mode can also be configured via the add_storage_pool command, or in a separate command. To Dell EMC VxFlex Ready Node AMS User Guide...
On ESXi, GUID and MDM lists are stored as module parameters, and not in a drv_cfg.txt file. To modify these parameters, use esxcli commands. 2. Save and close the file. 3. Type the following command: /etc/init.d/scini restart Detecting new volumes Dell EMC VxFlex Ready Node AMS User Guide...
Location of drv_cfg command: Linux: /opt/emc/scaleio/sdc/bin/drv_cfg Windows: C:\Program Files\emc\scaleio\sdc\bin\drv_cfg ESXi: Refer to "Update the SDC parameters in VMware based HCI or Compute node". Parameters Not applicable. Query volumes using drv_cfg Command drv_cfg --query_vols Dell EMC VxFlex Ready Node AMS User Guide...
This utility retrieves information about all known active tgt objects (SDSs) in kernel mode. Location of drv_cfg command: Linux: /opt/emc/scaleio/sdc/bin/drv_cfg Windows: C:\Program Files\emc\scaleio\sdc\bin\drv_cfg ESXi: Refer to "Update the SDC parameters in VMware based HCI or Compute node". Dell EMC VxFlex Ready Node AMS User Guide...
GUID. Example /opt/emc/scaleio/sdc/bin/drv_cfg --query_guid Query MDMs using drv_cfg Command drv_cfg --query_mdms Note: This is not a CLI command, but rather an executable that is run on the SDC server. Syntax /opt/emc/scaleio/sdc/bin/drv_cfg --query_mdms Dell EMC VxFlex Ready Node AMS User Guide...
Location of drv_cfg command: Linux: /opt/emc/scaleio/sdc/bin/drv_cfg Windows: C:\Program Files\emc\scaleio\sdc\bin\drv_cfg ESXi: Refer to "Update the SDC parameters in VMware based HCI or Compute node". Example /opt/emc/scaleio/sdc/bin/drv_cfg --load_cfg_file /etc/emc/scaleio/drv_cfg.txt Dell EMC VxFlex Ready Node AMS User Guide...
List of IP addresses (comma delimited) for this Master or Slave MDM Optional: --file <CONFIG_FILE_NAME> Name of the configuration file to which the MDM information should be written --only_cfg Do not call the kernel to actually connect Dell EMC VxFlex Ready Node AMS User Guide...
One of the existing MDM IP addresses --new_mdm_ip The new IP address list (comma delimited) for <NEW_MDM_IP_ADDRESSES> this MDM. If you want to retain the existing address(es), include them in this list. Optional: Dell EMC VxFlex Ready Node AMS User Guide...
ESXi host. <TIMEOUT_VALUE> is the timeout time in milliseconds. Its value can be 1000-3600000 (default is 60000) and including it in the command is optional. 2. Reboot the host. Dell EMC VxFlex Ready Node AMS User Guide...
1. Find the SDC’s GUID and the MDM IP addresses configured on the ESX, by typing the command: esxcli system module parameters list -m scini 2. In the output of the command, find the existing GUID and MDM IP addresses. Dell EMC VxFlex Ready Node AMS User Guide...
Page 153
5. Find the SDC’s GUID and the MDM IP addresses configured on the ESX, by typing the command esxcli system module parameters list -m scini 6. In the output of the command, find the existing GUID and MDM IP addresses. Dell EMC VxFlex Ready Node AMS User Guide...
Output where driver is installed and enabled to load, but not loaded: Name Is Loaded Is Enabled ----------------------------- --------- ---------- scini false true Example of SDC in correct state (enabled and loaded): Name Is Loaded Is Enabled ----------------------------- --------- ---------- scini true true Dell EMC VxFlex Ready Node AMS User Guide...
-ef | grep java kill -9 PID 3. Run one of the following commands to restart the AMS service: service scaleio-ams start systemctl start scaleio-ams 4. Check the status of the service: systemctl status scaleio-ams Dell EMC VxFlex Ready Node AMS User Guide...
Page 156
Managing System Objects Dell EMC VxFlex Ready Node AMS User Guide...
6. In the VxFlex OS GUI, from the System Settings menu at the top right side of the window, select the Renew Certificates option. The certificate renewal process will begin updating the certificates in VxFlex OS components. Dell EMC VxFlex Ready Node AMS User Guide...
5. Replace the existing unsigned certificate in the Linux-based AMS server with the new signed certificate: a. Perform either of the following: Access full path: java -jar /opt/emc/scaleio/ams/webapps/ ROOT/resources/scaleio_repository/ Relative path: cd /opt/emc/scaleio/ams/webapps/ROOT/ resources/scaleio_repository Dell EMC VxFlex Ready Node AMS User Guide...
AMS-MDM connection. You should fix the issue, and then enable the secure AMS-MDM connection again. Procedure 1. Log in to the VxFlex OS GUI. 2. Display the System Settings menu. Dell EMC VxFlex Ready Node AMS User Guide...
Page 161
To disable AMS-MDM secure connectivity (to move from secure to non- secure connectivity): a. Verify that the Enable AMS Secured Connection checkbox is selected (default selection). b. Deselect the Enable AMS Secured Connection checkbox. Dell EMC VxFlex Ready Node AMS User Guide...
1. Log in to the AMS server. 2. Perform one of the following: To change connectivity from secure mode to non-secure mode, perform the following steps: Option Description Windows a. Open a command line session. Dell EMC VxFlex Ready Node AMS User Guide...
Page 163
To change connectivity from non-secure mode to secure mode, perform the following steps: Option Description Windows a. Open a command line session. To run the full path command, type: java -jar C:\Program Files\EMC\scaleio\AMS\webapps \ROOT\resources\scaleio_repository\EMC-ScaleIO-ams- cli-<version>.jar --set_ams_secure_mode enable_secure_mode Dell EMC VxFlex Ready Node AMS User Guide...
Procedure 1. From the System Settings menu at the top right of the window, in any view, select the System Settings option. The System Settings window is displayed. Dell EMC VxFlex Ready Node AMS User Guide...
<Username> --password <Password> -- export_trusted_ssh_keys --file_name WANTED_FILE_NAME Output, similar to the following, appears: "status" : "Accepted" Backing up SSH keys via folder access: a. Go to the folder: Cd /opt/emc/scaleio/ams/webapps/ROOT/ resources/scaleio_repository Dell EMC VxFlex Ready Node AMS User Guide...
3. In the Current Password box, type the password currently defined as the emergency password. 4. In the New Password and Confirm Password boxes, type the new emergency password. 5. Click Save. Results The emergency password has been changed. Dell EMC VxFlex Ready Node AMS User Guide...
If you need to change any of them, do so using the VxFlex OS GUI. Procedure 1. From the System Settings menu at the top right side of the window, select the System Settings option. The System Settings window is displayed. Dell EMC VxFlex Ready Node AMS User Guide...
2. Perform the desired operation: Option Description Create (or a. Create a text file (or modify an existing file) with the modify) a new message that you want to display in the login banner. banner Dell EMC VxFlex Ready Node AMS User Guide...
When preemptive acceptance of the login banner is enabled (default), you can log in to VxFlex OS in a special way that activates preemptive acceptance of the login banner. Before you begin Preemptive acceptance of the login banner is enabled. Dell EMC VxFlex Ready Node AMS User Guide...
The following table describes the permissions that can be defined for local domain users and for LDAP domain users. Table 31 Local and LDAP user roles and permissions Configure user User role Query Configure parameters credentials Local LDAP Local LDAP Local LDAP Monitor Dell EMC VxFlex Ready Node AMS User Guide...
IP address of the AMS server, to all CLI commands. For example: scli --mdm_ip 10.10.10.3 --login --username admin You will be prompted to enter the password. For AMS login, the password is created during the installation of the AMS. Dell EMC VxFlex Ready Node AMS User Guide...
Page 172
/opt/emc/scaleio/ams/webapps/ROOT/resources/scli --login -- username admin --password <AMS_admin_password> Example /opt/emc/scaleio/ams/webapps/ROOT/resources/scli --login -- username admin --password Scaleio123 Output, similar to the following, is displayed: Logged in. User role is Administrator. System ID is 0000000000000000 Dell EMC VxFlex Ready Node AMS User Guide...
Page 173
LDAP authentication method should be set. --native_authentication Login with the native authentication method (default) --approve_certificate Preemptive approval of the MDM certificate Example scli --login --username siouser1 --password 1!2@3A Logging out Command logout Dell EMC VxFlex Ready Node AMS User Guide...
Page 174
--native_authentication Native authentication method, where users are managed locally in the system --native_and_ldap_authentication A hybrid authentication method. Both LDAP and Native users may log into the system after it is set. Dell EMC VxFlex Ready Node AMS User Guide...
When adding users, you may need to use the “ or ‘ characters to enable the use of Bash syntax characters. Parameters Parameter Description --username The user name to add to the system --user_role The user role: Monitor Configure BackEndConfigure FrontEndConfigure Security Administrator Dell EMC VxFlex Ready Node AMS User Guide...
Page 176
--delete_user --username siouser2 Modifying user credentials Command modify_user Syntax scli --modify_user (--user_id <ID> | --username <NAME>) --user_role <Monitor|Configure|BackEndConfigure|FrontEndConfigure|Security| Administrator> Actual command syntax is operating-system dependent. For more information, see “CLI basics”. Dell EMC VxFlex Ready Node AMS User Guide...
Page 177
Actual command syntax is operating-system dependent. For more information, see “CLI basics”. Description/Notes This command, only available to administrator roles, displays all the users defined in the system, their roles, and user ID. Example scli --query_users Dell EMC VxFlex Ready Node AMS User Guide...
Page 178
Description/Notes This command, only available to administrator roles, generates a new password for the specified user. The user will need to change the password again after logging in with this password. Dell EMC VxFlex Ready Node AMS User Guide...
--old_password flag and enter the password interactively. --new_password User's new password. Note: In Linux, to prevent the password from being recorded in the history log, leave out the --new_password flag and enter the password interactively. Dell EMC VxFlex Ready Node AMS User Guide...
Page 180
Password: admin Note: Having a single Super User dictates that the audit log will not track a certain person per se. If you need to re-enable the Super User, use the reset_admin command. Dell EMC VxFlex Ready Node AMS User Guide...
The following topics explain how to monitor the system, using the VxFlex OS GUI. Viewing object properties in Backend and Frontend views........184 Viewing detailed hardware properties............... 184 Viewing licensing information................186 Verifying your connection to the Management cluster........187 Collecting logs....................187 Dell EMC VxFlex Ready Node AMS User Guide...
The IP address of the SDS running on a node can be identified using the Hardware view Property Sheet. To view identify an SDS, perform the following: Procedure 1. In the Hardware view, navigate to the node, and in the middle panel, click the Node button. Dell EMC VxFlex Ready Node AMS User Guide...
If the SSD drive is used for caching, the property Used as Read Flash Cache: Yes is displayed. b. If the SSD drive is not used for caching, the property Used as Read Flash Cache: No is displayed. Dell EMC VxFlex Ready Node AMS User Guide...
Information required for licensing purposes is located in the About window, as described in the following steps: Procedure 1. From the System Settings menu at the top right side of the window, in any view, select the About option. Dell EMC VxFlex Ready Node AMS User Guide...
(including ESXi VM-support) logs. Logs are collected in ZIP format, which you can download for viewing. This procedure is used for technical support purposes only, and is described in the VxFlex OS Log Collection Guide . Dell EMC VxFlex Ready Node AMS User Guide...
Page 188
Monitoring the System using the VxFlex OS GUI Dell EMC VxFlex Ready Node AMS User Guide...
245 Compression Mode for Fine Granularity Storage Pools........246 Set Default Compression Mode................246 Snapshot Policies.....................246 Migrate volume trees (V-Trees)............... 247 Set V-Tree migration priority................249 Pause V-Tree migration..................249 Roll back V-Tree migration................250 Dell EMC VxFlex Ready Node AMS User Guide...
Procedure 1. Log in to the VxFlex OS GUI. 2. In Backend Storage view, locate the faulty server in the MDM cluster and > make a note of its details: Dell EMC VxFlex Ready Node AMS User Guide...
Page 191
9. From the VxFlex OS GUI Hardware view, identify the node in the data center: a. Right-click the node and select Set Identification LED. b. In the Set Identification LED dialog box, select Turn On, and then click OK. 10. Complete node removal through the AMS. Dell EMC VxFlex Ready Node AMS User Guide...
Removing devices The removal of storage devices can take a long time, because removal may require data to be moved to other storage devices in the system. If you plan to replace a Dell EMC VxFlex Ready Node AMS User Guide...
Page 193
From that node's Hardware view, write down the following: Node information Disk WWN Disk slot number c. From the Hardware view, locate the node and the faulty disk. The faulty disk is colored orange. Dell EMC VxFlex Ready Node AMS User Guide...
Page 194
Remove. This removes the disks from the Storage Pool. b. In the dialog box, click OK. c. If a rebuild or rebalance begins, wait for it to finish. Dell EMC VxFlex Ready Node AMS User Guide...
Page 195
For NVMe SSD devices, if you want to use it for caching or to remove it physically from the chassis, right-click the device and select Remove Disk Stale Configuration. The disk is removed from the VxFlex Ready Node system. Dell EMC VxFlex Ready Node AMS User Guide...
Page 196
For some objects, an Abort button is available in the window, which can be used if you decide to abort the operation. There is also an Abort command accessible from the Command menu. Dell EMC VxFlex Ready Node AMS User Guide...
From the Backend > Right-click the device, and select LED Settings. Physical > S.M.A.R.T. In the Device LED Settings window, select the view (for S.M.A.R.T. LED On check box, then click OK. supported devices): Dell EMC VxFlex Ready Node AMS User Guide...
Storage view, navigate to, and select one or more > Protection Domains. b. Verify that you have removed all child nodes from the Protection Domain. c. Right-click the Protection Domain and select Remove. Dell EMC VxFlex Ready Node AMS User Guide...
Page 199
Each time that you add devices to the system, you must map them to either Storage Pools or Acceleration Pools. Note: You cannot enable zero padding after adding the devices. For more information, see "Storage Pools". Dell EMC VxFlex Ready Node AMS User Guide...
Clear device errors. About this task Procedure 1. In one of the Backend views, navigate to the device in the table, and select its row. 2. Right-click the row and select Clear Device Errors. Dell EMC VxFlex Ready Node AMS User Guide...
Before you begin If you want to add a device to an Acceleration Pool, ensure that the Acceleration Pool has already been created for this purpose. During this procedure, you will need to map Dell EMC VxFlex Ready Node AMS User Guide...
5. If there are other devices still in the system were defined for DAS Cache use, you can now restart caching by returning to the Set DAS Cache Caching Policy window mentioned in Step 1, and change the setting back to Use DAS Cache. Dell EMC VxFlex Ready Node AMS User Guide...
About this task This procedure explains how to configure some Read Flash Cache-specific settings. These settings are applied to all Read Flash Cache devices installed in the specified Protection Domain. Settings include: Dell EMC VxFlex Ready Node AMS User Guide...
The progress of the operation is displayed at the bottom of the window. It is recommended to keep the window open until the operation is completed, and until you can see the result of the operation. Figure 38 Set Volume Use Read RAM Cache window Dell EMC VxFlex Ready Node AMS User Guide...
5. To enable, disable, or configure cache size for SDSs, in the Backend > Storage view, navigate to, and select the desired SDS(s). 6. Right-click the SDS and select Configure Caching and then Configure Read RAM Cache. Dell EMC VxFlex Ready Node AMS User Guide...
8. If you want to add more devices, click the Add device icon again and configure the fields in the new row. 9. Click OK. Results The Acceleration Pool has been created, and acceleration devices have been added to Dell EMC VxFlex Ready Node AMS User Guide...
2. Add two NVDIMMs 3. Boot up node. 4. Login and run Exit SDS maintenance mode from the GUI or CLI. 5. Run the following command: scli --update_sds_original_paths --sds_id <SDS-ID> Dell EMC VxFlex Ready Node AMS User Guide...
Configure Cache, and then Set Read Flash Cache Policy. 2. In the Set Read Flash Cache Policy window, clear the Enable Read Flash Cache check box, and click OK. Dell EMC VxFlex Ready Node AMS User Guide...
Procedure <iDRAC_IP_address> . 1. From a web browser go to http:// 2. In the Dell Console Login window, enter the username and password, and then click Login. The Dashboard displays the high-level status of all hardware devices in the System Health pane. The Memory icon should display an alert, signifying a failed device.
5. Record the slot number of the failed NVDIMM device in the NVDIMM information table. Note: If the slot number points to a regular DIMM as faulty, use the DIMM replacement procedure instead. 6. From the Dell console main window, select System Inventory Hardware > >...
Page 211
Serial Number: 16492521 "id": "802c-0f-1711-16492521", Locator: B7 Serial Number: 1649251B In the above example, the NMEM name is nmem0. 13. Record the NMEM name in the Device name row of the NVDIMM information table. Dell EMC VxFlex Ready Node AMS User Guide...
Page 213
About this task Note: In the following task, the term "failed NVDIMM" also refers to all NVDIMMs mounted on the server in cases of a failed NVDIMM battery or failed system board. Dell EMC VxFlex Ready Node AMS User Guide...
6. Remove the storage devices you identified in the previous step from the relevant Storage Pool: a. Navigate to Backend Devices view and find the SDS with the storage > devices you identified in the previous step. Dell EMC VxFlex Ready Node AMS User Guide...
Storage Pool and SDSs. For more information, see "Changing Read RAM Cache volume settings". Define volume names according to the following rules: Contains less than 32 characters Dell EMC VxFlex Ready Node AMS User Guide...
Page 216
The progress of the operation is displayed at the bottom of the window. It is recommended to keep the window open until the operation is completed, and until you can see the result of the operation. Dell EMC VxFlex Ready Node AMS User Guide...
In a system that has been upgraded and already has volumes mapped to SDCs, if you want to enable restricted SDC mode, you must first approve the SDCs and only then enable restricted SDC mode. Dell EMC VxFlex Ready Node AMS User Guide...
Page 218
SDCs view, right-click on the SDCs that you want to approve > and select Configure Approved IP Addresses. 2. In the Configure Approved IP Addresses window, add the IP addresses of the SDCs you want to approve. Dell EMC VxFlex Ready Node AMS User Guide...
Volume views, navigate to the volumes, and select > them. 2. From the Command menu or context-sensitive menu, select Unmap Volumes. The Unmap Volumes window is displayed, showing a list of the volumes that will be unmapped. Dell EMC VxFlex Ready Node AMS User Guide...
AMS deployment, or at any time in the System Settings menu. Verify that all hosts are connected to the vCenter. Note: It is critical that all hosts be connected to the vCenter. Dell EMC VxFlex Ready Node AMS User Guide...
Page 221
%vol%. If you are creating multiple datastores, the characters %i% are appended to indicate the index number of the datastore. 11. From the File System Type list, select VMFS. 12. Select Create. Dell EMC VxFlex Ready Node AMS User Guide...
The progress of the operation is displayed at the bottom of the window. It is recommended to keep the window open until the operation is completed, and until you can see the result of the operation. Dell EMC VxFlex Ready Node AMS User Guide...
The progress of the operation is displayed at the bottom of the window. It is recommended to keep the window open until the operation is completed, and until you can see the result of the operation. Dell EMC VxFlex Ready Node AMS User Guide...
The progress of the operation is displayed at the bottom of the window. It is recommended to keep the window open until the operation is completed, and until you can see the result of the operation. Dell EMC VxFlex Ready Node AMS User Guide...
In the Backend > Storage view, navigate to, and select the desired SDS. b. From the Command menu or context-sensitive menu, select Exit Maintenance Mode. The Exit Maintenance Mode window is displayed. Dell EMC VxFlex Ready Node AMS User Guide...
For a Protection Domain or a Go to the next step. Storage Pool: 4. In the Counter Type box, select a counter. Options vary, depending on the item selected in the previous step. Dell EMC VxFlex Ready Node AMS User Guide...
To reset counters for a specific Protection Domain or Storage Pool, perform the following steps: 6. In the Backend Storage view, navigate to, and select the desired Protection > Domain or Storage Pool. Dell EMC VxFlex Ready Node AMS User Guide...
Applying Performance Profiles to system components About this task You can use the VxFlex OS GUI to apply performance profiles to system components. The high performance profile configures a predefined set of parameters for very high Dell EMC VxFlex Ready Node AMS User Guide...
Priority can be given to different types of I/Os in the system, including application I/Os. The number of concurrent Rebuild, Rebalance and Migration of jobs can be configured, along with bandwidth used for these jobs. I/O prioritization is configured per Storage Pool. Dell EMC VxFlex Ready Node AMS User Guide...
RAID protection, and data copied for internal rebalancing and recovery from failures. You can modify the balance between these types of data loads by limiting the data copy bandwidth. This change affects all SDSs in the specified Protection Domain. Dell EMC VxFlex Ready Node AMS User Guide...
Information about errors will be provided in event reports. For more information about viewing events, see Viewing events on page 277. Dell EMC VxFlex Ready Node AMS User Guide...
Counters for data comparison errors, or corrected read errors, or both counter types can be reset. About this task To reset counters, follow these steps: Procedure 1. In the Backend Storage view, navigate to, and select the desired Storage > Pools. Dell EMC VxFlex Ready Node AMS User Guide...
3. Be unique within the object type When a name has not been defined, the system may display default system-defined names, as follows: SDC—its first IP address SDS—its first IP address Device—the path to the device Dell EMC VxFlex Ready Node AMS User Guide...
Log level Procedure 1. From any location in the VxFlex OS GUI, open the System Settings menu in the top right corner, and select User Preferences. The User Preferences window is displayed. Dell EMC VxFlex Ready Node AMS User Guide...
Figure 42 User Preferences window Table 32 User Preferences Item Description General: Controls the rate at which data displayed in the n seconds Refresh data every VxFlex OS GUI is refreshed, in seconds (Default: 10 seconds) Dell EMC VxFlex Ready Node AMS User Guide...
Page 236
These options are recommended only for advanced users and technical support purposes. Support: Controls the type of data saved in system logs, Log level which may be required by Customer Support for troubleshooting purposes. The default setting Dell EMC VxFlex Ready Node AMS User Guide...
To change the range of an existing IP address pool, edit the addresses. b. To add another IP address pool, click the + button, and type the new IP address range in the new row. Dell EMC VxFlex Ready Node AMS User Guide...
To configure ESRS settings, perform the following: Procedure 1. From the System Settings menu at the top right side of the window, select the System Settings option. The System Settings window is displayed. Dell EMC VxFlex Ready Node AMS User Guide...
Page 239
239. Validating ConnectEMC Dial-Home Verify that ConnectEMC (ESRS) is correctly configured and is communicating with Dell EMC Global Services, by performing a dial-home test. About this task This procedure describes how to quickly verify the connectivity between the ESRS- GW and ESRS servers, either after installation or after registering to ESRS.
Receiver box, and the port number in the new Port box. To remove a Trap Receiver, click the Remove button next to the item that you want to remove. 4. Type a number in the Resend Frequency box. Dell EMC VxFlex Ready Node AMS User Guide...
Install the license - using the VxFlex OS GUI Before you begin Before you begin this procedure, ensure that you have the license key from Dell EMC. Getting a license key involves receipt of an LAC (License Authorization Code) email from Dell EMC, and then either downloading the license key from the Dell EMC website, or receiving it by email from Dell EMC.
If you need to change any of them, do so using the VxFlex OS GUI. Procedure 1. From the System Settings menu at the top right side of the window, select the System Settings option. The System Settings window is displayed. Dell EMC VxFlex Ready Node AMS User Guide...
The Extend data network from 2 NICS to 4 NICs dialog box displays the port selections required for ports C and D. 7. Click OK. The Extend data network from 2 NICS to 4 NICs dialog box displays the data network NICs for all the nodes. Dell EMC VxFlex Ready Node AMS User Guide...
Execute the change to High_performance command: scli -- set_performance _parameters --all_sds -- all_sdc -- apply_to_mdm -- profile high_performanc To change the profile back to compact Execute the command: scli -- set_performance _parameters Dell EMC VxFlex Ready Node AMS User Guide...
Utilization view, drill down to the relevant volume. 2. Right-click on the volume and select Set V-Tree Compression Mode. The Set V-Tree Compression Mode dialog box is displayed. 3. Select the Enable Compression check-box. 4. Click OK. Dell EMC VxFlex Ready Node AMS User Guide...
7 snapshots 4 snapshots After defining the parameters, you must then select the source volume to add to the Snapshot Policy. You can add multiple source volumes to a Snapshot Policy, but a Dell EMC VxFlex Ready Node AMS User Guide...
Volumes view, select the V-Trees display. > 2. Expand the list of Protection Domains and Storage Pools and select the V-Tree that you want to migrate. 3. Right-click the volume and select Migrate V-Tree. Dell EMC VxFlex Ready Node AMS User Guide...
Page 248
SDC will not be able to trim it. These volumes can be trimmed by unmapping and then remapping them, or by rebooting the SDC. The SDC version will not affect capacity allocation and a V-Tree converted from thick Dell EMC VxFlex Ready Node AMS User Guide...
2. Expand the list of Protection Domains and Storage Pools and select the V-Tree whose migration you want to pause. To easily identify the V-Tree, search the Migration column for the following icon, which indicates volumes that are currently being migrated: Dell EMC VxFlex Ready Node AMS User Guide...
3. Right-click the volume and select Roll back V-Tree migration. The migration resumes in the reverse direction so that any data already migrated to the destination Storage Pool is now migrating to the source Storage Pool. Dell EMC VxFlex Ready Node AMS User Guide...
Move ESXi hosts to a new vCenter and reconfigure AMS........ 257 Best practices for using VMware vMotion............257 Update the hardware using the iDRAC virtual console........259 AMS management takeover of non-managed nodes.........261 Shutdown or restart a node gracefully............. 270 Dell EMC VxFlex Ready Node AMS User Guide...
By matching the volume ID in both outputs, you can match the operating system names, sciniX, with the VxFlex OS volume name. For example: scinia = fac22a6300000000 = vol0 scinic = fac22a6400000001 = vol1 Dell EMC VxFlex Ready Node AMS User Guide...
SDS (for example, 70721, 70722). <NE LIA listener 9099 Protobuf /opt/emc/ The VxFlex OS Installer connects to lia_port= over TCP scaleio/lia/cfg/ the LIA to perform installation and W_PORT> conf.txt maintenance-related operations. Dell EMC VxFlex Ready Node AMS User Guide...
Page 256
VxFlex OS Gateway \server.xml Connector service/daemon: <NEW_P port= Linux: Run service ORT> scaleio-gateway restart AMS (not <AMS installation Connector Windows: Restart the VxFlex OS secure) directory>\conf <NEW_P port= Gateway service \server.xml ORT> Dell EMC VxFlex Ready Node AMS User Guide...
The following ports can be used for vMotion on the ESXi. The recommended priority indicates which ports VxFlex OS recommends be used in order to limit the impact on VxFlex OS performance: Dell EMC VxFlex Ready Node AMS User Guide...
Admission Control must be disabled before upgrading a VxFlex Ready Node system. This procedure is relevant for administrators who create an ESXi cluster either not via the AMS orchestration, or via AMS but with HA disabled. Dell EMC VxFlex Ready Node AMS User Guide...
Boot option so that the server will boot to the iDRAC Virtual CDROM. 6. Power-cycle the server using the appropriate Power menu option, and allow the server to boot to the virtual media. Dell EMC VxFlex Ready Node AMS User Guide...
Page 260
GUI: <iDRAC_IP_address> . a. From your Internet browser, go to https:// b. In the DELL Console Login window, type these credentials: username: root password: Scaleio123 (for Dell-supplied nodes) or password (for EMC- supplied nodes) c.
Update the SATADOM firmware (13G servers only) The Dell factory should provide the SATADOM boot device with the correct firmware already loaded. However, in some cases, it may be necessary to update the firmware loaded on the SATADOM boot device.
Page 262
If the current node credentials do not match the VxFlex OS password policy, prepare a CSV file with those credentials. The CSV will be used during the take- Dell EMC VxFlex Ready Node AMS User Guide...
4. Run and AMS CLI command to perform the take-ownership process. Procedure 1. Install the VxFlex OS GUI: EMC-ScaleIO-gui-3.0-<build>.X.msi For more information, see "Install the VxFlex OS GUI." 2. Install the VxFlex Ready Node AMS: Dell EMC VxFlex Ready Node AMS User Guide...
Page 264
This documentation describes steps for all operating systems, even though some steps (such as SVM configuration) are not relevant for Linux deployment. c. Select to set up the AMS as a discovery proxy (optional), and enter its IP address. Dell EMC VxFlex Ready Node AMS User Guide...
Page 265
7. In the Data Networks screen, type IP address ranges for each data network. a. Select the IP address version (IPv4 or IPv6) in IP address version. IPv6 is supported in RHEL environments only. Dell EMC VxFlex Ready Node AMS User Guide...
Page 266
ESXi host: a. Create a vSwitch. b. Create a portgroup on the vSwitch with the name "ScaleIO_Internal". c. Create a VMkernel portgroup with the IP 10.10.0.2, netmask 255.255.255.252 on the "ScaleIO_Internal" portgroup. Dell EMC VxFlex Ready Node AMS User Guide...
Page 267
The NIC name is in the first line: (eno3) 2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 d. The MAC address is in the second line: (24:6e:96:42:3f:a4) link/ether 24:6e:96:42:3f:a4 brd ff:ff:ff:ff:ff:ff Dell EMC VxFlex Ready Node AMS User Guide...
Page 269
In the custom CSV file, type the IP address, username, and password of each node. The username and password in the CSV file overwrites the credentials assigned by the AMS wizard. Dell EMC VxFlex Ready Node AMS User Guide...
Procedure 1. When shutting down/rebooting a node that is a Master MDM (manager), it is recommended that you manually switch MDM ownership to a different node: Dell EMC VxFlex Ready Node AMS User Guide...
Page 271
IP Addresses: 9.20.10.102, 9.20.110.102, Management IP Addresses: 10.136.215.232, Port: 9011, Virtual IP interfaces: sio_d_1, sio_d_2 Status: Normal, Version: 2.0.13000 Tie-Breakers: ID: 0x6618e0b804644ca4 IP Addresses: 9.20.10.101, 9.20.110.101, Port: 9011 Status: Normal, Version: 2.0.13000 Dell EMC VxFlex Ready Node AMS User Guide...
Page 272
11. Gracefully shut down/reboot the node using the relevant API for the operating system. Note: On a Linux node, no checks are required for a graceful shutdown after entering the SDS into maintenance mode. Dell EMC VxFlex Ready Node AMS User Guide...
6. Wait for the rebuild/rebalance operations to finish. The node is now operational and application I/O can be started on the node. For ESXi nodes, you can migrate VMs to the node. Dell EMC VxFlex Ready Node AMS User Guide...
Page 274
Common Tasks Dell EMC VxFlex Ready Node AMS User Guide...
CHAPTER 11 System events The following topics describe VxFlex Ready Node system events and alerts. System events overview.................. 276 Event format....................276 Viewing events....................277 Event list......................280 Dell EMC VxFlex Ready Node AMS User Guide...
ID: a sequential number attached to all events Date: the local time set in the server Format: YYYY-MM-DD hh:mm:ss.ssssss Name: the unique name of the event Severity: one of the predefined severity levels Dell EMC VxFlex Ready Node AMS User Guide...
To configure events via email, see the EMC Secure Remote Services Installation and Operations Guide . Viewing events locally Events can be viewed by running the following command, and by using switches to filter the data. Command: showevents.py Dell EMC VxFlex Ready Node AMS User Guide...
Page 278
This section describes how to use the CLI to start, stop, and configure the facility field of the syslog events. Start posting events to remote syslog servers Syntax scli --start_remote_syslog --remote_syslog_server_ip <IP> [--remote_syslog_server_port <PORT>] [--syslog_facility <FACILITY>] [--attach_event_code] Dell EMC VxFlex Ready Node AMS User Guide...
Page 279
Stops posting events to remote syslog servers. Parameters Parameter Description --remote_syslog_server_ip <IP> A comma-separated list of syslog servers IP addresses Example scli --stop_remote_syslog --remote_syslog_server_ip 192.168.1.10,192.168.1.20 Configure the syslog events facility field Command: set_syslog_facility Dell EMC VxFlex Ready Node AMS User Guide...
This section lists all VxFlex Ready Node events, grouped by the following categories: Authentication CLI commands License and installation Rebuild Authentication Authentication Failed Parameter Description Name AUTHENTICATION_FAILED Message Authentication failed for user U Severity Warning Description User entered the wrong password Dell EMC VxFlex Ready Node AMS User Guide...
CLI_COMMAND_FAILED Message Command X failed with error E Severity Warning Description The CLI command X entered by user failed with error E Action Look up error E and address the issue accordingly Dell EMC VxFlex Ready Node AMS User Guide...
Verify the parameters entered for the snapshot_volume command License and installation License Expiration Warning Parameter Description Name LICENSE_EXPIRATION_WARNING Message License will expire in X days Severity Warning Description System license will expire in 30 days or less Dell EMC VxFlex Ready Node AMS User Guide...
Page 283
Message License has expired Severity Critical Description The system’s license has expired Action To resume operational mode, contact EMC Support for license renewal. If you have already renewed your license, install it. Dell EMC VxFlex Ready Node AMS User Guide...
An upgrade procedure was not able to complete Action Fix the error and retry the upgrade MDM Started Parameter Description Name MDM_STARTED Message MDM Process started Severity Info Description MDM process has started running Dell EMC VxFlex Ready Node AMS User Guide...
Page 285
All of the Storage Pool data has returned to Normal state Severity Info Description All Storage Pool data previously in Degraded or Failed state has returned back to Normal state. User data is fully accessible and protected. Dell EMC VxFlex Ready Node AMS User Guide...
SDC (IP: X; ID: Y; GUID: Z) disconnected Severity Warning Description SDC (IP: X; ID: Y; GUID: Z) has disconnected from the MDM. Action Make sure it is expected otherwise this might be a hardware malfunction Dell EMC VxFlex Ready Node AMS User Guide...
Page 287
SDS_REMOVE_DONE Message SDS X (IP:Y; ID: Z) was removed successfully Severity Info Description The asynchronous process of removing an SDS has completed. Action None Open SDS Device Failed Parameter Description Name OPEN_SDS_DEVICE_FAILED Dell EMC VxFlex Ready Node AMS User Guide...
Page 288
Capacity is high, due to capacity used by snapshots/thin volumes Action Remove unnecessary snapshots or add more storage Device capacity is critical Parameter Description Name DEV_CAPACITY_USAGE_CRITICAL Message Capacity usage on %s is CRITICAL.") Severity Error Dell EMC VxFlex Ready Node AMS User Guide...
Page 289
There were read errors on this device that were fixed by reading the data from secondary and re-writing it. This may be a sign of impending device hardware malfunction. Action Check for hardware malfunction Dell EMC VxFlex Ready Node AMS User Guide...
No Rebuild Progress Error Parameter Description Name NO_REBUILD_PROGRESS _ERROR Message No rebuild progress for 60 minutes Severity Error Description Rebuild did not progress for 60 minutes during the current recovery Action Contact EMC Support Dell EMC VxFlex Ready Node AMS User Guide...
Page 291
Rebuild progress resumed Severity Info Description Following a detection of a rebuild not progressing, the system has now detected that the rebuild progress has resumed. The system is currently recovering. Action None Dell EMC VxFlex Ready Node AMS User Guide...
Page 292
System events Dell EMC VxFlex Ready Node AMS User Guide...
CHAPTER 12 SNMP Trap Support The following topics describe VxFlex Ready Node support for SNMP. General......................294 Supported alerts and event numbering conventions.........294 Configuring SNMP using the VxFlex OS GUI............320 VxFlex OS.mib file.....................321 Dell EMC VxFlex Ready Node AMS User Guide...
System.License SIO01.02.000 3 (Error) 2 Contact EMC Support for will expire in n days EXPIRE .License_Is_Ab 0002 (Warning) license renewal. If you have out_To_Expire according to already renewed your license, install it. Dell EMC VxFlex Ready Node AMS User Guide...
Page 296
(if needed), and return to CLUSTER mode. MDM fails over MDM_FAILS_OVER_FR MDM.MDM_Cl SIO02.01.000 5 (Critical) 3 The MDMs frequently swap frequently EQUENTLY uster.MDM_Fail 0003 (Error) 2 ownership. No action (Warning) required. Dell EMC VxFlex Ready Node AMS User Guide...
Page 297
MDM repository. If you lose this copy, all System configurations and all the data on all the existing volumes will be lost. Please verify that this is an expected operation. Prepare the cluster Dell EMC VxFlex Ready Node AMS User Guide...
Page 298
Pool.Capacity_ 0004 3 (Error) volumes or snapshot usage, SHOLD Utilization_Abo the capacity utilization of ve_High_Thres the Storage Pool is hold reaching a high threshold. Remove snapshots, if possible, or add physical storage. Dell EMC VxFlex Ready Node AMS User Guide...
Page 299
There are cluster UNTRUSTED_CERTIFIC MDM.CERTIFIC SIO02.05.00 3 (Error) Pending for approval certificates pending ATE.UNTRUST 00001 certificates can be viewed approval. For more ED_CERTIFICA and approved via System information, open Settings > Connection. Dell EMC VxFlex Ready Node AMS User Guide...
Page 300
SIO03.01.000 3 (Error) The SDS service may be Disconnected 0001 down or unreachable over the network. Verify that the SDS service is up and running and that the network is properly connected. Dell EMC VxFlex Ready Node AMS User Guide...
Page 301
RFCACHE_CARD_IO_E SDS.SDS.RFCA SIO03.01.000 2 (Warning) Disable caching on the error RROR CHE_CARD_IO 0005 device and check the health _ERROR of the device, because it may be faulty. If necessary, replace the device. Dell EMC VxFlex Ready Node AMS User Guide...
Page 302
RFcache device RFCACHE_DEVICE_DO SDS.SDS.RFCA SIO03.01.000 2 (Warning) You tried to add a cache does not exist ES_NOT_EXIST CHE_DEVICE_ 0012 device that does not exist. DOES_NOT_E Check and fix Read Flash XIST Cache configuration. Dell EMC VxFlex Ready Node AMS User Guide...
Page 303
Device failed: All IO DEVICE_ERROR_WARN SDS.Device.De SIO03.02.000 3 (Error) Check the device, and if to the device will be vice_ErrorWarn 0006 necessary, replace it stopped, and data Dell EMC VxFlex Ready Node AMS User Guide...
Page 304
LOGICAL_DISK_INVALI Storage_Contr SIO06.02.00 3 (Error) Access the storage read policy is not set D_READ_AHEAD_POLI oller.Logical_Di 00001 controller and change the to "Read-Ahead" sk.INVALID_RE Logical Disk's read policy to AD_AHEAD_P "Read Ahead". OLICY Dell EMC VxFlex Ready Node AMS User Guide...
Page 305
VALID_TEMPE center. Check if a fan alert within the RATURE is raised in the node. Check configured threshold the battery and the RAID controller and replace faulty items. Dell EMC VxFlex Ready Node AMS User Guide...
Page 306
Storage VM match the user permissions QUERY_RAID_ name and password CONTROLLER configured in the AMS _INVALID_PER (System Settings menu > MISSIONS System Settings > Security option). Resolve the differences and try again. Dell EMC VxFlex Ready Node AMS User Guide...
Page 307
RATURE id_Temperature 0001 (Error) more Server RAM modules exceeds the configured threshold. Ensure that the server and its environment are properly cooled and that all the chassis fans are functional. Dell EMC VxFlex Ready Node AMS User Guide...
Page 308
Unable to connect NODE_FAILED_TO_CO Node.Node.FAI SIO07.05.000 5 (Critical) The SVM IP address or to monitoring agent NNECT_TO_SVM LED_TO_CON 0006 User credentials do not (SVM) NECT_TO_SV respond to AMS queries. Check the SVM state in Dell EMC VxFlex Ready Node AMS User Guide...
Page 309
AMS flow, exists in the network. EMC does not support such field replacement cases. Such cases should be solved by replacing nodes using EMC-recommended procedures. For more information, contact Customer Support. Dell EMC VxFlex Ready Node AMS User Guide...
Page 310
Node.Node.Am SIO07.05.000 5 (Critical) Disable AMS secure signed certificate _SIGNED_CERTIFICATE s_Mdm_Has_S 0022 connection, and enable it that was not elf_signed_cert again in order to replaced by the ificate automatically sign the MDM Dell EMC VxFlex Ready Node AMS User Guide...
Page 311
SDSs nected_From_ and all SDSs. All_Sds All SDCs are ALL_SDC_DISCONNEC System.SDC.All SIO01.07.000 5 (Critical) Check the network links disconnected from TED_FROM_ONE_SDS _Sdc_Disconne 0004 between all SDCs and the the SDS affected SDS. Dell EMC VxFlex Ready Node AMS User Guide...
Severity Recommended Action VxFlex OS GUI REST SNMP Trap (for ESRS) Errors have been PHYSICAL_DRIVE_ Storage_Controller. SIO06.01.000 5 (Critical) Replace the Physical Disk. detected on the BAD_STATE Physical_Drive.BAD 0001 Physical Disk _STATE Dell EMC VxFlex Ready Node AMS User Guide...
Page 313
Logical_Disk.INVALI 0004 storage controller is to RAID0 D_RAID_LEVEL incorrect. Access the storage controller, verify that the Logical Disk does not contain any data that is not backed- up, destroy the Logical Disk, Dell EMC VxFlex Ready Node AMS User Guide...
Page 314
The drive on which the ESXi drive state is not OK LID_STATE valid_State 0001 hypervisor is installed has reported an error. Replace the drive and reinstall the ESXi on the new drive. Dell EMC VxFlex Ready Node AMS User Guide...
Page 315
CPU and internal chassis fans are active. The CPU Voltage CPU_SOCKET_INV Node.Cpu_Socket.I SIO07.03.000 5 (Critical) Make sure that the server is Regulator's ALID_VR_TEMPER NVALID_VR_TEMP 0005 3 (Error) properly cooled and that the temperature is ATURE ERATURE Dell EMC VxFlex Ready Node AMS User Guide...
Page 316
LTAGE _VOLTAGE 0002 3 (Error) supply is functioning within the correctly, and then try to configured replace a port in the Power threshold Distribution Unit or check with external power. 2. Dell EMC VxFlex Ready Node AMS User Guide...
Page 317
5 (Critical) Ensure that the vCenter to monitoring agent _CONNECT_TO_V TO_CONNECT_TO 0008 configuration is correct, and (VCenter) CENTER VCENTER ensure that the node's Mgmt port is routable to the vCenter IP address Dell EMC VxFlex Ready Node AMS User Guide...
Page 318
The SSH _CONNECT_TO_H ailed_To_Connect_ 0018 Remove the node, and add key has been OST_SSH_KEY_MI To_Host_Ssh_Key_ the node again to the AMS. changed, and is not SMATCH Mismatch trusted by the AMS. Dell EMC VxFlex Ready Node AMS User Guide...
Page 319
Unit, or if there is an existing PSU, verify that it is properly connected. Power supply power PSU_POWER_LOS Chassis.Psu.Power_ SIO09.02.000 5 (Error) Check the power outlet/ loss Lost 0003 power feed to the server. Dell EMC VxFlex Ready Node AMS User Guide...
Configuring SNMP using the VxFlex OS GUI Configure SNMP and add trap receivers using the VxFlex OS GUI. Before you begin Ensure that you can authenticate to the VxFlex OS GUI with an admin user. Dell EMC VxFlex Ready Node AMS User Guide...
DisplayString FROM RFC1213-MIB OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF emc FROM EMC-MIB; scaleio MODULE-IDENTITY LAST-UPDATED "201511060000Z" ORGANIZATION "EMC Corporation" CONTACT-INFO "EMC Corporation www.emc.com" DESCRIPTION "The Structure of Management Information for the EMC SCALEIO enterprise." REVISION "201511060000Z" DESCRIPTION Dell EMC VxFlex Ready Node AMS User Guide...
Page 322
"Action code of the alert" ::= { scaleioAlert 4 } -- 1.3.6.1.4.1.1139.101.1.5 scaleioGroups OBJECT IDENTIFIER ::= { scaleioAlert 5 } -- 1.3.6.1.4.1.1139.101.1.5.1 currentObjectGroup OBJECT-GROUP OBJECTS { scaleioAlertSeverity, scaleioAlertType, scaleioAlertSourceObjectId, scaleioAlertActionCode } STATUS current DESCRIPTION Dell EMC VxFlex Ready Node AMS User Guide...
Page 323
NOTIFICATIONS { scaleioAEAlert } STATUS current DESCRIPTION "scaleio-MIB-V2 NOTIFICATION-GROUP." ::= { scaleioGroups 2 } scaleioAEAlert NOTIFICATION-TYPE OBJECTS { scaleioAlertSeverity, scaleioAlertType, scaleioAlertSourceObjectId, scaleioAlertActionCode } STATUS current DESCRIPTION "ScaleIO Alert" ::= { scaleio 2 } Dell EMC VxFlex Ready Node AMS User Guide...
Page 324
SNMP Trap Support Dell EMC VxFlex Ready Node AMS User Guide...
CHAPTER 13 Server Factory Reset and Power Operations The following topics explain how to open a Dell iDRAC console session, how to perform power operations, and how to perform a factory reset. Perform a factory reset..................326 activities....................335 Dell EMC VxFlex Ready Node AMS User Guide...
- root iDRAC password - The default password is calvin for 13G nodes and Scaleio123 for 14G nodes. BIOS password - emcbios During the iDRAC IP and BIOS setup, use the following operations: Dell EMC VxFlex Ready Node AMS User Guide...
Page 327
6. In the System Setup Main Menu screen, select the System BIOS menu. 7. In the System BIOS Settings screen, verify that the processor settings are correct. If the settings are incorrect, configure them as follows: Dell EMC VxFlex Ready Node AMS User Guide...
VxFlex Ready Node 13G server. Before you begin Ensure that you know: The IP address of the iDRAC port The username and password for the iDRAC portal (default username and password are root and password) Dell EMC VxFlex Ready Node AMS User Guide...
Procedure <iDRAC_IP_address> . 1. From a browser, go to http:// 2. In the DELL Console Login window, type the user name and password, and then click Login. The System Summary dashboard displays the high-level status of all hardware devices in the Server Health pane.
Procedure <iDRAC_IP_address> . 1. From a browser, go to http:// 2. In the DELL Console Login window, enter the user name and password, and then click Login. The Dashboard displays the high-level status of all hardware devices in the System Health pane.
Server Factory Reset and Power Operations 2. In the DELL Console Login window, type the user name and password, and click Login. 3. In the main KVM console window, select the Server node in the navigation pane. The System Summary dashboard is displayed.
Page 332
Procedure <iDRAC_IP_address> . 1. From your Internet browser, go to https:// 2. In the DELL Console Login window, type the user name and password, and click Login. 3. From the dashboard, click Launch Virtual Console to start a console session.
This option will make the server install the ISO the next time that the server boots up. 7. To reset the server, in the main DELL System Setup console window, select Power Reset System (warm boot) to display the list of keyboard keys with >...
Page 334
OS image downloaded from the VxFlex OS support page. Customers can choose a Red Hat licensing option listed on this page, or bring their own Red Hat license. Dell EMC is not responsible for enforcing OS licensing. Dell EMC VxFlex Ready Node AMS User Guide...
1. To activate the server LED, use one of the following methods: On the dashboard, click Identify System, and then in the Success message click OK. The LED starts blinking. To stop the LED from blinking, click Identify System again, and then click Dell EMC VxFlex Ready Node AMS User Guide...
Page 336
3. To power the server off or on, use of the following methods: From the dashboard, click Graceful Shutdown Power Off, and then click > From the dashboard, select Power Management Power Control Power > > Off System / Power On System. Dell EMC VxFlex Ready Node AMS User Guide...
CHAPTER 14 DTK - Hardware Update Bootable ISO The Dell OpenManage Deployment Toolkit (DTK) includes a set of utilities, sample scripts, and sample configuration files that you can use to deploy and configure the Dell systems. This section provides additional information on using the VxFlex Ready Node Hardware Update Bootable ISO ("Hardware ISO") to update drivers, BIOS, and...
Guide_en-us.pdf. Update the hardware using remote RACADM You can install and execute the Dell RACADM tool from any management system with access to the iDRAC network. The remote RACADM command set is useful in this situation to mount and execute the Hardware ISO to a large number of VxFlex Ready Node servers.
Page 339
The hardware update scripts will continue to run from RAM on the server. The update script will generate a log indicating whether each configuration and firmware flash is successful. Dell EMC VxFlex Ready Node AMS User Guide...
Update the SATADOM firmware (13G servers only) The Dell factory should provide the SATADOM boot device with the correct firmware already loaded. However, in some cases, it may be necessary to update the firmware loaded on the SATADOM boot device.
BIOS and firmware The Hardware ISO runs a script that automatically forces the server to install the necessary firmware updates. This firmware is consistent with the qualified Dell EMC VxFlex Ready Node Driver and Firmware Matrix, located at: PowerEdge 13G: https://support.emc.com/products/41077...
DTK - Hardware Update Bootable ISO <dracIP> is the iDRAC IP address <password> is the password for the server <filename.exe> is the name of the Dell Windows update packages Note: The default password is calvin for 13G nodes and Scaleio123 for 14G nodes.
-r <dracIP> -u root -p <password> jobqueue delete -i JID_CLEARALL_FORCE Where: <dracIP> is the iDRAC IP address <password> is the password for the server Note: The default password is calvin for 13G nodes and Scaleio123 for 14G nodes. Dell EMC VxFlex Ready Node AMS User Guide...
The DTK is unable to configure the BIOS settings, and the following error message may appear: ERROR: BOOT016: Input source argument value for the boot device is incorrect or not found among the boot devices on the system. Dell EMC VxFlex Ready Node AMS User Guide...
Therefore, it is normal to see these error messages within the logs: Firmware updates may also display and log the following message: This update is not compatible with your system configuration. Dell EMC VxFlex Ready Node AMS User Guide...
Dell OpenManage Deployment Toolkit (DTK) The Dell OpenManage Deployment Toolkit (DTK) includes a set of utilities, sample scripts, and sample configuration files that you can use to deploy and configure Dell systems. You can use the DTK to build script-based and RPM-based installation for deploying large number of systems on a pre-operating system environment in a reliable way, without changing their current deployment processes.
Page 347
DTK - Hardware Update Bootable ISO For more information, visit the Dell OpenManagement Deployment Toolkit wiki homepage. Dell EMC VxFlex Ready Node AMS User Guide...
Page 348
DTK - Hardware Update Bootable ISO Dell EMC VxFlex Ready Node AMS User Guide...
VxFlex OS is controlled by a cluster of MDM nodes, minimally consisting of a Master MDM, Slave MDM, and a Tie Breaker node. 5-node clusters consist of one Master MDM, two Slave MDMs, and two Tie Breakers. Dell EMC VxFlex Ready Node AMS User Guide...
Page 350
Lockbox is a component of the RSA Common Security Toolkit (CST) which securely stores data (such as passwords) in an encrypted file. A lockbox must be defined for LDAP (secure LDAP), SNMP, and SRS. For LDAP, lockbox use is optional. Dell EMC VxFlex Ready Node AMS User Guide...
Page 351
Capacity that has an accessible copy in the system, in case of failure. Protection Domain A unique set of SDSs grouped together for reliability and tenancy separation. RAM Read Cache Server RAM that is reserved for caching storage devices in a Storage Pool. (RMcache) Dell EMC VxFlex Ready Node AMS User Guide...
Page 352
A sub-set of physical storage devices in a Protection Domain. Each storage device can only belong to one Storage Pool. User volumes will always use the storage of a single Storage Pool. Dell EMC VxFlex Ready Node AMS User Guide...
Page 353
The full screen view can be minimized into a widget, which is a small window that floats on your screen, over other applications. Property sheets can also be minimized into widgets. Write Misses Write requests that were not found in cache Dell EMC VxFlex Ready Node AMS User Guide...