hit counter script

Dell EMC VxFlex Ready Node User Manual page 256

Hide thumbs Also See for EMC VxFlex Ready Node:
Table of Contents

Advertisement

Common Tasks
Port used by
Port #
SNMP
162
SDBG for MDM
25620
(Manager)
SDBG for MDM
25600
(Tie Breaker)
SDBG for SDS
25640
AMS (secure)
22
AMS (ICMP)
N/A
AMS (secure)
443
AMS (not
80
secure)
Dell EMC VxFlex Ready Node AMS User Guide
256
Table 33 Default ports (continued)
Protocol
File to change
SNMP v2
<gateway
over UDP
installation
directory>/
webapps/ROOT/WEB-
INF/classes/
gatewayUserProper
ties
SSH
Note:
Cannot be modified, and must be
available
ICMP
Note:
Cannot be modified, and must be
available
<AMS installation
directory>\conf
\server.xml
<AMS installation
directory>\conf
\server.xml
Field to modify
Notes
(or to add, if it
does not exist)
snmp.port
SNMP traps for system alerts are
sent to a trap receiver via this port.
The VxFlex OS Gateway sends
messages to:
snmp.traps_receiver_ip on the port
snmp.port
If you change the port number,
restart the VxFlex OS Gateway
afterwards.
Used by VxFlex OS internal
debugging tools to extract live
information from the system for
debugging purposes.
When multiple SDSs are installed on
the same physical server, use ports
x , where x is the index of the
2564+
SDS (for example, 25641, 25642).
The AMS uses this port to connect
to the SVM and hosts via SSH
during deployment and post
deployment for management and
monitoring.
Internet Control Message Protocol
(ICMP) is a supporting protocol in
the Internet protocol suite.
The AMS uses this protocol to ping
the SVM, host and iDRAC IPs to
check connectivity.
redirectPort
After changing the port, you must
<NEW_PORT>
=
restart the VxFlex OS Gateway
Connector
service/daemon:
<NEW_P
port=
Linux: Run service
l
ORT>
scaleio-gateway restart
Connector
Windows: Restart the VxFlex OS
l
<NEW_P
port=
Gateway service
ORT>

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents