Dell EMC VxFlex Ready Node User Manual page 142
Hide thumbs
Also See for EMC VxFlex Ready Node:
- Operating system installation manual (74 pages) ,
- Operating system installation manual (86 pages) ,
- Installation manual (92 pages)
Table of Contents
Advertisement
Managing System Objects
Dell EMC VxFlex Ready Node AMS User Guide
142
Procedure
1. On the SDS, perform one of the following, depending on the Operating System:
Operating
System
Linux
Windows
2. Open the following SDS file with a text editor, and change the port number
shown there to the new port number:
Operating System File name
Linux
Windows
3. Open the following SDS configuration file with a text editor:
Operating System File name
Linux
Windows
4. Add the parameter tgt_port = <NEW_PORT_NUM> to the file, where
<NEW_PORT_NUM> represents the new port number.
5. Perform one of the following:
Operating
System
Linux
Windows
6. On the SDS, perform one of the following:
Operating System
Linux
Windows
Task
Run the script: /opt/emc/scaleio/sds/bin/
close_firewall_port.sh
From command line, run the batch file C:\Program Files
\EMC\scaleio\sds\bin\close_firewall_port.bat
/opt/emc/scaleio/sds/bin/port
C:\Program Files\EMC\scaleio\sds\bin\port
/opt/emc/scaleio/sds/cfg/conf.txt
C:\Program Files\EMC\scaleio\sds\cfg
\conf.txt
Task
Run the script: /opt/emc/scaleio/sds/bin/
open_firewall_port.sh
From command line, run the batch file C:\Program Files
\EMC\scaleio\sds\bin\open_firewall_port.bat
Task
Run the command:
Pkill sds
From command line, run the command:
net stop sds_service & net start sds_service
- Quick Links:
- Introduction to Vxflex Ready Node
- Hardware
Hide quick links:
Advertisement
Chapters
Table of Contents
