d. Add a new NIC to the SVM (vmxnet3) and connect it to "ScaleIO_Internal".
e. In the SVM OS, configure the new NIC with IP 10.10.0.1 netmask
255.255.255.252.
f. Validate that ping works between the ESXi host and SVM.
12. On each host, rename the portgroup names for management and data networks
as shown in the steps. Refer to
vSphere/6.5/com.vmware.vsphere.networking.doc/
GUID-3A9D9911-3632-4B81-9D2E-A2F9F2D01180.html.
a. Management network portgroup name - 'VM Network ScaleIO'
b. First Data network portgroup name - '10G_Data1_ScaleIO network'
c. Second Data network portgroup name - '10G_Data2_ScaleIO network'
13. On each SVM, rename the NICs as shown:
a. Management network NIC name - 'sio_mgmt'
b. First data network NIC name - 'sio_d_1'
c. Second data network NIC name - 'sio_d_2'
d. Example of management NIC renaming in CentOS 7.5:
a. Retrieve the NIC name and the MAC address of the management NIC by
running the command:
ip addr
b. Find the NIC with the management IP address in the output:
2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc mq state UP qlen 1000
link/ether 24:6e:96:42:3f:a4 brd ff:ff:ff:ff:ff:ff
inet 10.234.210.3/20 brd 10.234.223.255 scope global
eno3
valid_lft forever preferred_lft forever
inet6 2620:0:170:8105:266e:96ff:fe42:3fa4/64 scope
global mngtmpaddr dynamic
valid_lft 2591949sec preferred_lft 604749sec
inet6 fd00::10:234:210:3/96 scope global
valid_lft forever preferred_lft forever
inet6 fe80::266e:96ff:fe42:3fa4/64 scope link
valid_lft forever preferred_lft forever
c. The NIC name is in the first line: (eno3)
2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc mq state UP qlen 1000
d. The MAC address is in the second line: (24:6e:96:42:3f:a4)
link/ether 24:6e:96:42:3f:a4 brd ff:ff:ff:ff:ff:ff
https://docs.vmware.com/en/VMware-
Dell EMC VxFlex Ready Node AMS User Guide
Common Tasks
267