Dell EMC VxFlex Ready Node User Manual page 302
Hide thumbs
Also See for EMC VxFlex Ready Node:
- Operating system installation manual (74 pages) ,
- Operating system installation manual (86 pages) ,
- Installation manual (92 pages)
Table of Contents
Advertisement
SNMP Trap Support
Alert Message in
Alert Message in
VxFlex OS GUI
REST
RFcache skipped
RFCACHE_CACHE_SKI
due to heavy load
P_DUE_TO_HEAVY_LO
AD
RFcache IO stack
RFCACHE_IO_STUCK_
error
ERROR
RFcache resources
RFCACHE_LOW_RESO
are low
URCES
RFcache driver path
RFCACHE_INVALID_DR
is invalid
IVER_PATH
RFcache source
RFCACHE_INCONSIST
configuration is not
ENT_SOURCE_CONFIG
consistent
URATION
RFcache source
RFCACHE_INCONSIST
configuration is not
ENT_CACHE_CONFIGU
consistent
RATION
RFcache device
RFCACHE_DEVICE_DO
does not exist
ES_NOT_EXIST
Dell EMC VxFlex Ready Node AMS User Guide
302
Table 34 VxFlex OS Alerts in SNMP, VxFlex OS GUI, REST, and ESRS (continued)
Alert
Message in
SNMP Trap
SDS.SDS.RFCA
CHE_CACHE_
SKIP_DUE_TO
_HEAVY_LOAD
SDS.SDS.RFCA
CHE_IO_STUC
K_ERROR
SDS.SDS.RFCA
CHE_LOW_RE
SOURCES
SDS.SDS.RFCA
CHE_INVALID_
DRIVER_PATH
SDS.SDS.RFCA
CHE_INCONSI
STENT_SOUR
CE_CONFIGUR
ATION
SDS.SDS.RFCA
CHE_INCONSI
STENT_CACHE
_CONFIGURAT
ION
SDS.SDS.RFCA
CHE_DEVICE_
DOES_NOT_E
XIST
Alert Code
Severity
(for ESRS)
SIO03.01.000
2 (Warning)
0006
SIO03.01.000
2 (Warning)
0007
SIO03.01.000
2 (Warning)
0008
SIO03.01.000
2 (Warning)
0009
SIO03.01.000
2 (Warning)
0010
SIO03.01.000
2 (Warning)
0011
SIO03.01.000
2 (Warning)
0012
Recommended Action
Read Flash Cache is
working under a heavy load,
and therefore has skipped
some IOs. This is a
temporary error which
should resolve itself. If it
persists, try to balance the
Storage Pool contents
across more SDSs, or add
more cache cards.
IO has become stuck on the
cache device. Disable
caching on the device and
check the health of the
device, because it may be
faulty. If necessary, replace
the device.
There is not enough RAM
available on the server for
Read Flash Cache optimal
operation. Increase the
amount of available RAM.
The Read Flash cache
driver (xcache) is either not
installed, or was installed in
the wrong location. Install
the driver, and contact
Customer Support if the
problem persists.
Check RFcache state of all
disks in the pool and adjust
them so that all disks have
the same caching state.
Query the system to
determine what is not
consistent in the
configurations of the Read
Flash cache driver and the
SDS where the cache
device is located.
You tried to add a cache
device that does not exist.
Check and fix Read Flash
Cache configuration.
- Quick Links:
- Introduction to Vxflex Ready Node
- Hardware
Hide quick links:
Advertisement
Chapters
Table of Contents
