Configuring Oscillating Failure Counters; Configure Oscillating Failure Counter Parameters - Dell EMC VxFlex Ready Node User Manual
Hide thumbs
Also See for EMC VxFlex Ready Node:
- Operating system installation manual (74 pages) ,
- Operating system installation manual (86 pages) ,
- Installation manual (92 pages)
Table of Contents
Advertisement
Configuring the System using the VxFlex OS GUI
Configuring Oscillating Failure counters
Configure Oscillating Failure counter parameters
Dell EMC VxFlex Ready Node AMS User Guide
226
c. If you want to force exit from Maintenance Mode even though there is a
failed SDS, select the Force Failed SDS check box.
d. Click OK.
The status area at the bottom of the window indicates when the operation is
complete. Once the operation has been successfully completed, the SDS
returns to normal operation, and data deltas collected on other SDSs during the
maintenance period are copied back to the SDS.
Oscillating failure handling provides the ability to handle error situations, and to reduce
their impact on normal system operation.
This feature detects and reports various oscillating failures, in cases when
components fail repeatedly and cause unnecessary failovers. You can configure the
time interval associated with each window type, and the number of failures allowed
before reporting commences for each window type, per counter.
You can reset specified oscillating failure counters to zero. This can be useful when
you have fixed a problem and want to ensure that an alert is no longer active in the
system.
Configure Oscillating Failure counter parameters for the entire system, or for specific
Protection Domains or Storage Pools.
About this task
Procedure
1. Perform one of the following:
Option
To configure counter parameters for
all SDCs, Protection Domains or
Storage Pools in the system:
To configure counter parameters for
a specific Protection Domain or
Storage Pool:
2. From the Command menu or context-sensitive menu, select Set Oscillating
Failure Properties.
3. Perform one of the following:
Option
For system level:
For a Protection Domain or a
Storage Pool:
4. In the Counter Type box, select a counter. Options vary, depending on the item
selected in the previous step.
Description
In the Backend
>
the System icon.
In the Backend
>
navigate to, and select the desired
Protection Domain or Storage Pool.
Description
In the For All box, select an option: SDCs,
Protection Domains, orStorage Pools.
Go to the next step.
Storage view, select
Storage view,
- Quick Links:
- Introduction to Vxflex Ready Node
- Hardware
Hide quick links:
Advertisement
Chapters
Table of Contents
