Dell EMC VxFlex Ready Node User Manual page 269
Hide thumbs
Also See for EMC VxFlex Ready Node:
- Operating system installation manual (74 pages) ,
- Operating system installation manual (86 pages) ,
- Installation manual (92 pages)
Table of Contents
Advertisement
Creating a management takeover CSV file
Operating
Command to run
System of
AMS server
If the non-AMS-managed system is not using LDAP, enter any strings for --
monitor_username and --monitor_password.
For more information on the AMS CLI, see the VxFlex Ready Node CLI Reference
Guide .
To supply credentials in a CSV file, add the following to the end of the
command: --custom_node_credentials_file
"<PATH_TO_CSV_FILE>"
For example:
C:\Program Files\EMC\scaleio\AMS\webapps\ROOT\resources
\scaleio_repository --username admin --password Scaleio123 --
take_ownership --mdm_ips 10.234.215.223 --mdm_username admin
--mdm_password Scaleio123 --monitor_username remander --
monitor_password reman123 --custom_node_credentials_file "c:/
customCredsPlugin2.csv"
This process can take several minutes. Progress is displayed on the screen.
16. Replace the certificates of the nodes that you added, using one of the following
methods:
AMS CLI command: --replace_nodes_certificates
l
From the VxFlex OS GUI, select System Settings
l
Results
The AMS can now be used to manage all the nodes in the previously non-managed
system.
After you finish
Perform the mandatory (and optional) post-deployment steps, described in the "Post-
deployment" section.
During the management takeover process, you can upload a custom CSV file to assign
different credentials for each iDRAC or node (RHEL or ESXi).
You can use a custom CSV file in the following circumstances:
The credentials of nodes to be taken over do not match the VxFlex OS policy. For
l
example, the node password doesn't meet the VxFlex OS requirements.
The nodes do not all have the same password.
l
In both these cases, you must enter a valid password in the AMS deployment wizard
to be used for future system expansion. In the custom CSV file, type the IP address,
username, and password of each node. The username and password in the CSV file
overwrites the credentials assigned by the AMS wizard.
<MONITOR_USER_NAME> --monitor_password
<MONITOR_PASSWORD>
Dell EMC VxFlex Ready Node AMS User Guide
Common Tasks
Renew Certificates.
>
269
- Quick Links:
- Introduction to Vxflex Ready Node
- Hardware
Hide quick links:
Advertisement
Chapters
Table of Contents
