Set V-Tree Compression Mode; Mode - Dell EMC VxFlex Ready Node User Manual
Hide thumbs
Also See for EMC VxFlex Ready Node:
- Operating system installation manual (74 pages) ,
- Operating system installation manual (86 pages) ,
- Installation manual (92 pages)
Table of Contents
Advertisement
Set V-Tree compression mode
Task
To view full parameter settings for an MDM
To view full parameter settings of a specific SDS (this also shows the
MDM settings)
To view full parameter settings of a specific SDC (this also shows the
MDM settings)
Note:
Refer to the "Performance Parameters" for a list containing all default and
performance profile parameters.
You can enable compression per V-Tree for Fine Granularity Storage Pools.
About this task
Compression is done by applying a compression-algorithm to the data. For more
information on compression mode, see "V-Trees" on the Getting to Know guide .
Procedure
1. From Frontend > Volumes > V-Tree Migration view or V-Tree Capacity
Utilization view, drill down to the relevant volume.
2. Right-click on the volume and select Set V-Tree Compression Mode.
The Set V-Tree Compression Mode dialog box is displayed.
3. Select the Enable Compression check-box.
4. Click OK.
Configuring the System using the VxFlex OS GUI
Dell EMC VxFlex Ready Node AMS User Guide
Command
--all_sds --
all_sdc --
apply_to_mdm --
profile compact
Execute the
command:
scli --
query_performan
ce_parameters
--print_all
Execute the
command:
scli --
query_performan
ce_parameters
--sds_name
<NAME> --
print_all
Execute the
command:
scli --
query_performan
ce_parameters
--sdc_name
<NAME> --
print_all
245
- Quick Links:
- Introduction to Vxflex Ready Node
- Hardware
Hide quick links:
Advertisement
Chapters
Table of Contents
