Dell EMC VxFlex Ready Node User Manual page 153
Hide thumbs
Also See for EMC VxFlex Ready Node:
- Operating system installation manual (74 pages) ,
- Operating system installation manual (86 pages) ,
- Installation manual (92 pages)
Table of Contents
Advertisement
For example, in the output excerpt below, the GUID and IP addresses are
marked in bold:
IoctlIniGuidStr string
39b89295-5cfc-4a42-bf89-4cc7e55a1e5b
12345678-90AB-CDEF-1234-567890ABCDEF
IoctlMdmIPStr string
9.99.101.22,9.99.101.23
should be comma-separated. To configure more than one cluster
use '+' to separate between IPs.For Example:
10.20.30.40,50.60.70.80+11.22.33.44. Max 1024 characters
3. To configure the MDM IP addresses on the SDC, type the command
esxcli system module parameters set -m scini -p
"IoctlIniGuidStr=<GUID> IoctlMdmIPStr=<MDM_IPS>"
where
<GUID> is the existing SDC GUID that you identified in the previous step,
<MDM_IPS> is the list of MDM IP addresses. A maximum of 1024
and
characters is allowed.
a. To replace the old MDM IP addresses with new MDM IP addresses, omit the
old addresses from the command.
b. To add MDM IP addresses to the existing IP addresses, type both the
existing IP addresses and the new IP addresses in the command.
MDM IP addresses for MDMs in same cluster must be comma-separated. To
configure more than one cluster, use '+' to separate between IP addresses in
different clusters. For example:
esxcli system module parameters set -m scini -p
"IoctlIniGuidStr=39b89295-5cfc-4a42-bf89-4cc7e55a1e5b
IoctlMdmIPStr=10.20.30.40,50.60.70.80+11.22.33.44"
4. To apply the new configuration, restart the ESX server.
To change the GUID of the SDC, perform these steps:
5. Find the SDC's GUID and the MDM IP addresses configured on the ESX, by
typing the command
esxcli system module parameters list -m scini
6. In the output of the command, find the existing GUID and MDM IP addresses.
Ini Guid, for example:
Mdms IPs, IPs for MDM in same cluster
Dell EMC VxFlex Ready Node AMS User Guide
Managing System Objects
153
- Quick Links:
- Introduction to Vxflex Ready Node
- Hardware
Hide quick links:
Advertisement
Chapters
Table of Contents
