Apply Performance Profiles To System Components - Dell EMC VxFlex Ready Node User Manual
Hide thumbs
Also See for EMC VxFlex Ready Node:
- Operating system installation manual (74 pages) ,
- Operating system installation manual (86 pages) ,
- Installation manual (92 pages)
Table of Contents
Advertisement
VxFlex OS performance fine-tuning
Apply Performance Profiles to system components
Dell EMC VxFlex Ready Node AMS User Guide
128
You can use the VxFlex OS GUI to apply performance profiles to system components.
About this task
The default configures a predefined set of parameters for very high performance use
cases. When a container is provided in the command (System/Protection Domain/
Fault Set), all the objects currently in the container are configured.
Note:
For a complete list of parameters controlled by the profiles, refer to "VxFlex
OS Performance Fine-Tuning ".
The profiles are applied separately to:
SDSs
l
SDCs
l
MDM cluster
l
Note:
After changing the performance profile of an SDS (on an SVM), you
must perform manual memory allocation on the SVM, as described in the
VxFlex OS Deployment Guide .
To apply a profile to system components, perform the following steps:
Procedure
1. Depending on the system component that you want to configure, in either the
Backend
Storage or Frontend
>
desired objects.
Note:
If you want to apply the Performance Profile to MDMs, select the
System object.
2. Right-click the object and select Set Performance Profile for XXX, where
XXX represents one of the following:
MDMs
l
All SDSs
l
SDS
l
All SDCs
l
SDC
l
The Set Performance Profile for window is displayed.
3. Select a profile from the drop-down list, and click OK.
SDCs view, navigate to, and select the
>
- Quick Links:
- Introduction to Vxflex Ready Node
- Hardware
Hide quick links:
Advertisement
Chapters
Table of Contents
