Dell EMC VxFlex Ready Node User Manual page 301
Hide thumbs
Also See for EMC VxFlex Ready Node:
- Operating system installation manual (74 pages) ,
- Operating system installation manual (86 pages) ,
- Installation manual (92 pages)
Table of Contents
Advertisement
Alert Message in
Alert Message in
VxFlex OS GUI
REST
SDS disconnects
SDS_DISCONNECTS_F
frequently
REQUENTLY
Memory allocation
SDS_RMCACHE_MEM
for RAM Read
ORY_ALLOCATION_FAI
Cache failed on SDS
LED
DRL mode:
DRL_MODE_NON_VOL
Hardened
ATILE
RFcache card I/O
RFCACHE_CARD_IO_E
error
RROR
Table 34 VxFlex OS Alerts in SNMP, VxFlex OS GUI, REST, and ESRS (continued)
Alert
Message in
SNMP Trap
SDS.SDS.SDS_
Disconnected_
Frequently
SDS.SDS.SDS_
Rmcache_Mem
ory_allocation_
Failed
SDS.SDS.DRL_
MODE_NON_V
OLATILE
SDS.SDS.RFCA
CHE_CARD_IO
_ERROR
Alert Code
Severity
(for ESRS)
SIO03.01.000
3 (Error) 2
0002
(Warning)
according to
disconnect
count and
hard-coded
SIO03.01.000
2 (Warning)
0003
SIO03.01.000
1 (Info)
0004
SIO03.01.000
2 (Warning)
0005
Dell EMC VxFlex Ready Node AMS User Guide
SNMP Trap Support
Recommended Action
The SDS connection is
fluctuating due to an
unstable network
connection. Check the SDS
data network connection
for Packet Drops, and try to
disconnect one of the ports
to see if the SDS
disconnection issue is
resolved by using only one
port. If this does not resolve
the issue, switch to the
other port. If there is still an
issue, it may be due to a
Faulty NIC, Faulty Switch
ports, or a faulty switch. If
there is no issue with
another switch, the issue
was switch-related.
Otherwise, the issue may
be due to a faulty NIC,
which requires NIC
replacement.
The system failed to
allocate memory to the SDS
RAM Read-Cache. For 32
GB RAM or less, up to 50%
of the memory can be
allocated for caching. From
32 GB or more, up to 75%
of the memory can be
allocated for caching.
Reduce the configured
RAM Read-Cache memory
to match the allocation
conditions.
DRL Mode is configured to
"Hardened" instead of
"Volatile". Both modes are
configurable.
Disable caching on the
device and check the health
of the device, because it
may be faulty. If necessary,
replace the device.
301
- Quick Links:
- Introduction to Vxflex Ready Node
- Hardware
Hide quick links:
Advertisement
Chapters
Table of Contents
