Dell EMC VxFlex Ready Node User Manual page 248
Hide thumbs
Also See for EMC VxFlex Ready Node:
- Operating system installation manual (74 pages) ,
- Operating system installation manual (86 pages) ,
- Installation manual (92 pages)
Table of Contents
Advertisement
Configuring the System using the VxFlex OS GUI
Dell EMC VxFlex Ready Node AMS User Guide
248
The Migrate V-Tree dialog box opens and displays the selected V-Tree's
information, including Protection Domain and Storage Pool.
4. In the Migrate V-Tree dialog box, select the destination Storage Pool.
The Storage Pool's free capacity is displayed. Ensure that you select a Storage
Pool with enough capacity for the V-Tree size.
5. Optionally, expand Advanced to select one or several of the following advanced
options:
Option
Allow migration
during rebuild
Add migration at
the head of the
migration queue
Ignore
destination
capacity
Convert V-Tree
from...
Description
Allow migration of the V-Tree to start and continue during
a system rebuild operation.
Give this V-Tree migration the highest priority in the
migration priority queue.
Allow the migration to start regardless of whether there is
enough capacity at the destination.
Convert a thin-provisioned V-Tree to thick-provisioned, or
vice-versa, at the destination, depending on the
provisioning of the source volume.
Note:
SDCs with a version earlier than v3.0 do not fully
support converting a thick-provisioned V-Tree to a
thin-provisioned V-Tree during migration; after
migration, the V-Tree will be thin-provisioned, but the
SDC will not be able to trim it. These volumes can be
trimmed by unmapping and then remapping them, or
by rebooting the SDC. The SDC version will not affect
capacity allocation and a V-Tree converted from thick
- Quick Links:
- Introduction to Vxflex Ready Node
- Hardware
Hide quick links:
Advertisement
Chapters
Table of Contents
